make me a tow hook too haha, I need one for mine!
make me a tow hook too haha, I need one for mine!
OZ Rally Crew #001, Quaife Club member :D
lol are you saying they are diifferent sizes,, or that its not good if they are different sizes?
yea im not trying to fuck up the ecu, thanks for the heads up though you just saved me a bunch of time. looks like im buying some pro crimpers!
I think he said he will buy the arm kit if he needs to.
Other solution and it's not as cleaning but definitely will save u some money. Since those donor plugs came with wires just solder those to the corresponding wires and put it in the plug. That's what I have considered doing.
'00 Mitsubishi Galant ES 4g64T (Samantha)
'01 Mitsubishi Galant ES 4g64 (Daily)
'02 Mitsubishi Galant ES 4g64 (SCRAPPED)
'00 Mitsubishi Galant ES 4g64 (SCRAPPED)
'91 Volvo 740 Turbo B230FT (SOLD)
'88 Mitsubishi Mighty Max (SOLD)
'91 Kawasaki ZX7 (SOLD)
'95 Kawasaki ZX9R
im trying to avoid any solder if possible, the joints get weak and could break with constant vibration and this thing vibrates ALOT! Also its the prefered method according the AEM manual and all of the research ive done on wiring track cars have said the same, not that i have a real track car but thats my ultimate goal one day. so i figure why not
ok so after some more research i discovered which pins i need and where to order from. since i already have the plugs from the junk yard i dont have to buy the AEM kit for $70 so i save some money there which is always good.
the pins cost .12 cents a piece and i need "around" 76 so thats just under $10 but im gonna order alot more then i need since there so cheap this way i can practice some crimping and just to have extra in case the counts are wrong.
pins im ordering:
http://www.newunitedracetech.com/sho...keyword=175265
http://www.newunitedracetech.com/sho...keyword=175269
heres a link about the evo ecu wiring and part numbers that i found, very helpful.
http://evoecu.logic.net/wiki/Plugs,_...and_Connectors
and this is a 3g link about running dual ecu's, not what i need but it has good info on pins and ecu plugs and how to remove the pins from them.
http://www.club3g.com/forum/rs-gs/15...bers-info.html
heres a pic of one of the 3g ecu plugs, you see the two different size pin openings
and here are the pins themselves, left is the bigger one
and last but not least the galant side of the Boomslang harness, if you look close you can see two pins bent ready to snap off. every time i have to move the harness around for what ever reason or someone rest their feet there im worried one will break off again and im gonna spend some time trying to figure out where it goes and fixing it.
this ecu pocket was ment to sit flipped over actually but i have to make some openings on the sides for the harness and the port cable for that to work. the passenger will gain a lil more leg room after that not much though lol. i dont know why the original fabricator didnt realize that.
compared to.........
i made this a long time ago... i thought i posted it on here but i guess not. when i made my own harness i put this together hope it helps
Brandon - 2001 Galant GST 5speed
Wiseco // Eagle // PTE // Holset // Turbonetics // Supertech // Blox // Prosport // Vibrant // Innovate // OpenEcu // Mishimoto // Magnaflow // Walbro // XXR // Rotora // Brembo // Hawk // R1 Concepts // Dc Sports
Good info on the pins and pinouts. Thanks guys.
'00 Mitsubishi Galant ES 4g64T (Samantha)
'01 Mitsubishi Galant ES 4g64 (Daily)
'02 Mitsubishi Galant ES 4g64 (SCRAPPED)
'00 Mitsubishi Galant ES 4g64 (SCRAPPED)
'91 Volvo 740 Turbo B230FT (SOLD)
'88 Mitsubishi Mighty Max (SOLD)
'91 Kawasaki ZX7 (SOLD)
'95 Kawasaki ZX9R
finally got the VIR pics from last month
a race prepped Factory Five breathing down my neck
thats it for now, going to Pocono Raceway in two weekends, cant wait!!
Looking good, it's a nice mix going between FWD and RWD, great combo, quick question, where are you planning on bolting the tow hook to?
OZ Rally Crew #001, Quaife Club member :D
to the rear crash bar mounting points on the passenger side.
I'd love a nice tow hook but I don't have it in me to cut into the JDM bumpers :-(
'00 Mitsubishi Galant ES 4g64T (Samantha)
'01 Mitsubishi Galant ES 4g64 (Daily)
'02 Mitsubishi Galant ES 4g64 (SCRAPPED)
'00 Mitsubishi Galant ES 4g64 (SCRAPPED)
'91 Volvo 740 Turbo B230FT (SOLD)
'88 Mitsubishi Mighty Max (SOLD)
'91 Kawasaki ZX7 (SOLD)
'95 Kawasaki ZX9R
'00 Mitsubishi Galant ES 4g64T (Samantha)
'01 Mitsubishi Galant ES 4g64 (Daily)
'02 Mitsubishi Galant ES 4g64 (SCRAPPED)
'00 Mitsubishi Galant ES 4g64 (SCRAPPED)
'91 Volvo 740 Turbo B230FT (SOLD)
'88 Mitsubishi Mighty Max (SOLD)
'91 Kawasaki ZX7 (SOLD)
'95 Kawasaki ZX9R
'00 Mitsubishi Galant ES 4g64T (Samantha)
'01 Mitsubishi Galant ES 4g64 (Daily)
'02 Mitsubishi Galant ES 4g64 (SCRAPPED)
'00 Mitsubishi Galant ES 4g64 (SCRAPPED)
'91 Volvo 740 Turbo B230FT (SOLD)
'88 Mitsubishi Mighty Max (SOLD)
'91 Kawasaki ZX7 (SOLD)
'95 Kawasaki ZX9R
Bookmarks