I need wheel adapters for 4x114.3 to 5x114.3. Does anyone know where I can find relatively cheap ones? And what site or if ebay might be a good route?
Most people will probably tell you to grab some hubs from a 5-lug 2G and swap it out that way, as it's safer and doesn't change your wheels offset. However, if you must use a spacer, see what http://www.motorsport-tech.com/ can do for you. Hope this helps!
-Greg
"I smashed up the grey one, bought me a red;
Every time we hit the parking lot we turn heads!"
-Pimp C, "International Players Anthem"
Honestly adapters are a bad idea. At the cheapest I would get used 2g FWD hub assemblies front and rear and drill your rotors to accept 5 lug or get used rotors. Personally I would go all new everything but you decide what you want. I just prefer dependability and not trusting a small piece of steel
2014 Lancer Evo GSR
1996 Galant S 5 Speed Turbo
Need a Turbo rebuilt or upgraded--> http://www.thegalantcenter.org/showt...ebuild-Service
That's the best idea . Galant tuners can give you . So take it
Alright thanks for the replies guys. I'll look into getting the hubs then.
Www.enjuku.com....... also just get 5lug convertion
Posting Rules
Log in
Register
Reply With Quote
Bookmarks