I fixed my cruise control that wasn't working cause of my led tails.
got this from cali,
im not at all happy with the fitment, so ill be taking it to work and making it work, also it came with no hardware, not even sure if its suppose to have hardware. and double side tape on the top near the roof line will not cut it for me, so ill find some L brackets and rivet them the it and use more double side to stick it the the glass.
and give it a coat of paint, when i get my new shell.
should i color match it or paint it black?
MODS
5 speed swap
Eibach Pro Kit on GR2 Struts
Cold Air Intake
Outlander Intake Manifold
6G72 V6 Throttle Body
6G72 V6 Fuel Pump
Axle Back Exhaust (ebay)
Evo Fuel Rail
Evo Radiator
Rear Disc Swap
Prothane Motor Mount Inserts
im getting 25mpg city and 30mpg highway untuned!!!
I fixed my cruise control that wasn't working cause of my led tails.
T.I. 04 BUILD YOUR OWN
New thermostat and radiator hoses
Condenser from the donor
Fans (used to be single fan)
New radiator
All in ...
Need to do water pump and timing belt before I fill with coolant
Sent from Tapatalk 2 using my Rooted DROID BIONIC on Android ICS
You mean custom led tails you made or just bulbs..cause its funny my cruise stop working all of a sudden and I use to have led bulbs for the brakes. Never tried the cruise again, since I took them out last month. Thing is now I'm trying to remember if it was working when I had em in lol, I forgot at what point I gave up on it
'00 Mitsubishi Galant ES 4g64T (Samantha)
'01 Mitsubishi Galant ES 4g64 (Daily)
'02 Mitsubishi Galant ES 4g64 (SCRAPPED)
'00 Mitsubishi Galant ES 4g64 (SCRAPPED)
'91 Volvo 740 Turbo B230FT (SOLD)
'88 Mitsubishi Mighty Max (SOLD)
'91 Kawasaki ZX7 (SOLD)
'95 Kawasaki ZX9R
I made custom led tails... When my parking lights are on they are just lit up on the outer edge of my TYC housings, When I hit my brakes the Mitsubishi logo lights up in the middle of the circle. I put a thread up, or added to an existing one when I assembled them a couple years ago.
T.I. 04 BUILD YOUR OWN
Today I ordered my front and rear strut mounts so I can finally replace my aging struts and install the new springs. I also got the door jamb switches so I can finish wiring my entry lights.
T.I. 04 BUILD YOUR OWN
I second that. Clean
OZ Rally Crew #001, Quaife Club member :D
My trans mount insert finally came today. Front and rear Energy Suspension Inserts and Left and Right Prothane Inserts.
15 F150 3.5 ecoboost 4x4 - daily driver
01 Galant ES V6 MT (sold)
00 Eclipse RS MT
So its done, she lives. Rear disk swap and The 5 speed. Shifts flawlessly. If theres anything wrong, its me learning to drive stick. Anyway all thats left is the brakes to be bled and she'll be golden. Big thanks to whokilledhoughes and johnathansgalant for their help with the swap.
http://youtu.be/OUtVXmrv4sM
Sent from Tapatalk 2 using my Rooted DROID BIONIC on Android ICS
Changed my brakes yesterday:
Just pads, the rotors were still meaty and relatively smooth, and I'm saving for Brembo's anyways, which is when I'll do the major brake overhaul anyway.
Ran across a slight problem. I haven't changed the brakes since I bought the car, so I'm chalking it up to previous owner neglect (though I doubt it, she was meticulous with the car), but my brakes are wearing unevenly side-to-side. My sliders are greased and the calipers are floating/sliding perfectly when mounted, but the driver's side was worn considerably more than the passenger side:
Passenger side:
Driver's side:
Got me stumped, because the car doesn't pull at all when braking. Otherwise, she's driving and stopping great right now.
-Greg
"I smashed up the grey one, bought me a red;
Every time we hit the parking lot we turn heads!"
-Pimp C, "International Players Anthem"
Take a look at the hose on the side that is wearing more.
T.I. 04 BUILD YOUR OWN
Struts and mounts came today.... Almost tripped over the boxes leaving for work, hopefully the springs come soon.
T.I. 04 BUILD YOUR OWN
Bookmarks