8G Auto to Manual Conversion DONE! **UPDATED 02/03/06**

[Guzm4n]

I believe that's just used so you don't shift out of gear until you press the brake pedal.

[Rodriguez]

I believe that's just used so you don't shift out of gear until you press the brake pedal.

Yea i figured, so what could it be? I know I've crossed the right pins.

[Guzm4n]

How long has the battery been disconnected? I know I took too long on my swap & my car wouldn't start cause I needed a new battery.

[Rodriguez]

How long has the battery been disconnected? I know I took too long on my swap & my car wouldn't start cause I needed a new battery.

2 months maybe, i tried jumping it while i started the car

[[DC_eightG_00]]

Congrats bro

[coconut]

2 months maybe, i tried jumping it while i started the car

Did you figure out your problem? Just got my swap done with no issues and cruise control works like factory. Pm me if you need any help with it.

[spdracr]

Did you figure out your problem? Just got my swap done with no issues and cruise control works like factory. Pm me if you need any help with it.

So its done, she lives. Rear disk swap and The 5 speed. Shifts flawlessly. If theres anything wrong, its me learning to drive stick. Anyway all thats left is the brakes to be bled and she'll be golden. Big thanks to whokilledhoughes and johnathansgalant for their help with the swap.



http://youtu.be/OUtVXmrv4sM

So its done, she lives. Rear disk swap and The 5 speed. Shifts flawlessly. If theres anything wrong, its me learning to drive stick. Anyway all thats left is the brakes to be bled and she'll be golden. Big thanks to whokilledhoughes and johnathansgalant for their help with the swap.



http://youtu.be/OUtVXmrv4sM

He posted this!!

[Rodriguez]

Yea guys sorry i didn't keep up with the thread, all is well for now lol. The car is another animal, and its not even boosted yet. Still waiting on a few parts for the turbo.

[evo_powered_galant]

quick question, i see that i can use a 2g clutch kit when you use the 3g trans. but will i still use the 2g clutch kitt when i use the evo trans when i do the awd swap??? also what flywheel will i use?

[spdracr]

No u use an evo clutch and flywheel I believe. Someone correct me if I'm wrong.

[Galantman03]

no your right lol

[lazy t]

So if I am using the 2g starter will there be any problems not having the heat shield in place?

When you say throw out the two flywheel spacers you mean the shims correct? Any help would be great.

[coconut]

So if I am using the 2g starter will there be any problems not having the heat shield in place?

When you say throw out the two flywheel spacers you mean the shims correct? Any help would be great.

I didnt use them on my swap and havent had a problem yet.

[lazy t]

I didnt use them on my swap and havent had a problem yet.

Can you use the 2g release bearing. It seems to fit good?

[lazy t]

So I have completed the swap. While it is running the crank shaft is making a noise. Is it possible that the flywheel is not centered causing the main shaft to be off balance? Every thing sounds good except the harmonic balancer area. I ran it with the belts off to eliminate if I damaged a pulley during install. That was not the issue. I saw there was a line up hole on the block I eyeballed it when installing the flywheel.. Don't know if that could be my problem.

[lazy t]

I am also hearing a roaring or rattle noise in the trans. I inspected thru the bottom plate nothing appears to be damaged? I am about to go crazy!

[goblyn4u]

Thank you for this thread. I installed my 5 speed 2 days ago and lovin it.

[GOOSEY2099]

You welcome

Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta

[bronxbombr]

I am also hearing a roaring or rattle noise in the trans. I inspected thru the bottom plate nothing appears to be damaged? I am about to go crazy!

did you use a OEM throw bearing, did you install the clip correctly?

[Pdowden]

I want a 5 speed so bad