Nice wheel collection!
OZ Rally Crew #001, Quaife Club member :D
Nice wheel collection!
-Greg
"I smashed up the grey one, bought me a red;
Every time we hit the parking lot we turn heads!"
-Pimp C, "International Players Anthem"
So good news and bad news, good news act xtss is good for gobs of torque, 429wtq to be exact, and it's certainly holding well now, turns out I was being robbed of power and torque by the slipping clutch, car got tossed on the dyno again after the the clutch replacement and ltw flywheel, gained 27whp and 24wtq, for a total of 231whp and 280wtq on 14psi on an evo 8 16g. bad news is my left calf is in for a work out
OZ Rally Crew #001, Quaife Club member :D
Nice!!
The "Tumbler" Is HereStock Longblock/Stock PCM | Custom Garrett 50-1 | 17 Psi | Weighing 2xxxLbs3xxWHP/3xxWTQ [Current]
Good going
Sweet. looks like ill be hitting my goal then,
What size turbo? 9.8 or 10.5
Sent from my PC36100 using Tapatalk 2
MODS
5 speed swap
Eibach Pro Kit on GR2 Struts
Cold Air Intake
Outlander Intake Manifold
6G72 V6 Throttle Body
6G72 V6 Fuel Pump
Axle Back Exhaust (ebay)
Evo Fuel Rail
Evo Radiator
Rear Disc Swap
Prothane Motor Mount Inserts
im getting 25mpg city and 30mpg highway untuned!!!
nice numbers. the XTSS(2600) only will feel heavy for the first week or so then it feels normal, it then becomes fun to hop in a lighter clutch car and almost put the clutch pedal through the firewall tho haha.
2014 Lancer Evo GSR
1996 Galant S 5 Speed Turbo
Need a Turbo rebuilt or upgraded--> http://www.thegalantcenter.org/showt...ebuild-Service
![]()
9.8. Im gonna get a new.manifold lower ic.pipe and n o2.dump and.call it.good
OZ Rally Crew #001, Quaife Club member :D
255/40/17 RS-3s, which are almost a good inch wider than my NT-05s on the volks haha. wheel gap is larger because of the slightly smaller overall diameter from going to 17s. Fits perfect with no rubbing anywhere even @ full lock...
also relocated the small battery i had, removed the battery tray, fabbed up two small L brackets to bolt to the bracket that held up the battery tray, and then cut and welded the battery tie down to work. fits great and moves the battery almost a foot back and eliminates the heavy tray. :) Pics of that in the am.
Last edited by greddy; 01-30-2013 at 12:09 AM
OZ Rally Crew #001, Quaife Club member :D
Oh man I need side shots! That looks like a good combo, mentally I'm picturing it rolling and I like.
The "Tumbler" Is HereStock Longblock/Stock PCM | Custom Garrett 50-1 | 17 Psi | Weighing 2xxxLbs3xxWHP/3xxWTQ [Current]
i'll get some tomorrow, I'll keep them on till saturday for a photoshoot for a feature but then they come off and go in bags and into the house to stay warm, gonna put the volks on one side and the ssrs on the other for the shoot, should be good fun if the weather is somewhat cooperative.
OZ Rally Crew #001, Quaife Club member :D
Oh hell yeah. That sounds legit!
The "Tumbler" Is HereStock Longblock/Stock PCM | Custom Garrett 50-1 | 17 Psi | Weighing 2xxxLbs3xxWHP/3xxWTQ [Current]
thanks guys, here's the battery relocation, not much, but saves 2.5 pounds and moves the battery further back, I would say it's right under the strut tower bar, the small battery saved like 20 pounds from my old one.
![]()
OZ Rally Crew #001, Quaife Club member :D
Nice! Good fab skills. Eventually you should paint it the color of your car.
The "Tumbler" Is HereStock Longblock/Stock PCM | Custom Garrett 50-1 | 17 Psi | Weighing 2xxxLbs3xxWHP/3xxWTQ [Current]
hmm now im comtemplating 255's on my se37k's, rather then 245's
DO IT!
so the heater core is leaking ever so slightly after a pressure test, so that needs to be fixed, but I did wash the car finally
![]()
OZ Rally Crew #001, Quaife Club member :D
Bookmarks