The Galant Center - Powered by vBulletin

Thread: Newb from Tampa!!

Page 1 of 2 12 LastLast
Showing results 1 to 20 of 24
  1. #1

    Icon6 Newb reporting from Tampa!!

    Hello, TGC!!Im a new member here at TGC, but not new to the forum! I have been a ghost here for a few months and its about time i joined. I have recently got my hands on my mom's hand-me-down 2002 Galant Ls 4G64 and i plan on doing many mods!! I look forward to being an active member here and meeting all the peeps!!

    The car itself is nt in the best cosmetic shape lol. No dents, accidents, missing parts! Just a bunch of scratches on the hood and pretty much all over lol. There is one issue i have, there is some gorilla glue on some trims in the interior and a few spots on the exterior. Anyone have ideas on how to get it off without damaging the clear coat? The car's paint is in great shape however! The car also runs like a dream with no problems whatsoever; it is at 126k and it has millions more to go! Lol

    Any-who, HELLO TGC!!!
    Last edited by 1skglnt; 03-03-2014 at 02:18 PM

  2. #2
    Welcomed

    As always.... pics? lol
    1994 Galant GS - Daily driver
    1994 Galant LS - Parts car

    Garage: http://www.thegalantcenter.org/garag...iew-20241.html

  3. #3
    Booty Luva wetamup2k3g's Avatar
    Join Date
    12-13-2010
    Location
    Brooklyn, Maryland
    Posts
    4,643
    Welcome to TGC!

    -Greg

    "I smashed up the grey one, bought me a red;
    Every time we hit the parking lot we turn heads!"
    -Pimp C, "International Players Anthem"

  4. #4
    Welcome! Not sure on what you can use on the glue. Safest thing I can think of is may be bug and tar remover by turtle wax. I know it does a good job on decal and emblem adhesive when its a thin layer. Another thing maybe worth a try is goo gone. I've used both on the exterior with no damage to paint, but I always wipe/ rinse with water to dilute the area after. But sine I've only used on the exterior, I can't really be held responsible if it goes wrong lol. Maybe you'll find safer definite solutions, but if not keep those in mind. Also if its a thick layer, maybe try using a hair dryer to soften it up before using whatever you use to clean it.

    If you choose go gone, try a dollar tree store as they carry a small bottle for cheap. So if it doesn't work, there's no big loss. The tar remover on the other hand is a win win, cause you can always use for quick cleaning of bugs, tar/sap, bird bombs lol. Walmart should carry it
    Last edited by 8thLS6; 03-03-2014 at 03:27 PM

  5. #5
    I didn't even think to try goo gone, thanks! Appreciate it! I have tried bug and tar remover and it didn't work that well. I'll probably try the hair drier and goo gone. Thanks again! And I'll get some pics of it up tomorrow when I get better ones haha. The only things I have done to it so far is debadged it, blacked the tail lights out (getting new ones soon) and got a carbon fiber logo (Girlfriend's present lol).

  6. #6
    And thanks for the welcomes, guys!

  7. #7
    Welcome to TGC Florida.. Nice to see another member representing..

    -Danny
    Quote Originally Posted by deeznutz View Post
    Ally and her whip a day helps keep the drama away!

  8. #8
    TGC Lifetime Patron Black8GV6's Avatar
    Join Date
    07-02-2011
    Location
    South Florida, by the beach
    Posts
    1,076

    Welcome, I'm about 1.5 hours south of you, glad to see another Florida member. You're at 126k miles, when was your last timing belt done? Mitsu says to get a new one every 60k miles, if you haven't gotten a new belt since 60k I would do that asap since if the belt snaps then you'll have a big problem.


    EDIT: July 19th, big mitsu car meet in St. Pete http://www.xecofl.com/events/afm-the-beach-meet/
    You should go
    Last edited by Black8GV6; 03-03-2014 at 06:27 PM
    15 F150 3.5 ecoboost 4x4 - daily driver
    01 Galant ES V6 MT (sold)
    00 Eclipse RS MT

  9. #9
    Thanks guys! And yeah, I was looking into replacing the timing belt some time this summer. Thanks for the heads up! And that's awesome! I was going to ask if there are any Mitsubishi meets here in this area sooner or later! Thanks for the info, I'll definitely be there! Hopefully my G will be lowered by then. Planning on getting an Eibach lowering kit, both struts and springs are well overdue for replacement.

  10. #10
    TGC Lifetime Patron oakrdrs187's Avatar
    Join Date
    05-14-2010
    Location
    Coachella, CA
    Posts
    5,954
    Welcome to posting on TGC!

    Sent From My Rooted Galaxy Note 2 using Tapatalk

  11. #11
    Welcome to TGC! Should post some pics of your G!


    Lancer/EvolutionX Rotor Glow Paint
    6g74 Forged Engine w/ hx40 turbo
    Eclipse GT 5 spd swapped


    Rotor Glow Galant
    Daily Galant
    OZ Edition Eclipse

  12. #12


    Here are some pics as the G stands now.
    Few things I have done to the car are
    Tint
    Keyless Entry
    Tinted taillights
    Debadged

  13. #13
    Looking good, Welcome !

  14. #14
    Booty Luva wetamup2k3g's Avatar
    Join Date
    12-13-2010
    Location
    Brooklyn, Maryland
    Posts
    4,643
    All these grayscale (white, silver, gray, black) Galants make me miss my gray Galant. Coming along nicely!

    -Greg

    "I smashed up the grey one, bought me a red;
    Every time we hit the parking lot we turn heads!"
    -Pimp C, "International Players Anthem"

  15. #15
    Thanks guys! I want to replace the taillights with the JDM ones, the reason why I tinted them is because the passenger side one got cracked, and I didn't have the money at the time to replace them. But, before I do the tails, the suspension is my biggest priority at the moment.

  16. #16
    TGC Lifetime Patron finald8ta's Avatar
    Join Date
    02-17-2011
    Location
    i live in sunny florida
    Posts
    1,240
    Welcome bro. Finally another fla member in my local area. Im up in the pasco area. I have big plans with my newer G so if you need any help hit me up.

    Sent from my LG-LS970 using Tapatalk
    MODS

    5 speed swap
    Eibach Pro Kit on GR2 Struts
    Cold Air Intake
    Outlander Intake Manifold
    6G72 V6 Throttle Body
    6G72 V6 Fuel Pump
    Axle Back Exhaust (ebay)
    Evo Fuel Rail
    Evo Radiator
    Rear Disc Swap
    Prothane Motor Mount Inserts


    im getting 25mpg city and 30mpg highway untuned!!!

  17. #17
    TGC Lifetime Patron oakrdrs187's Avatar
    Join Date
    05-14-2010
    Location
    Coachella, CA
    Posts
    5,954
    I see you got that Viper on there. Is a remote starter?

    I don't fucks with anything else...

    Sent From My Rooted Galaxy Note 2 using Tapatalk

  18. #18
    Where in pasco are you? I have some family there! And nah, it's not a remote starter, just the keyless entry haha

  19. #19
    TGC Lifetime Patron oakrdrs187's Avatar
    Join Date
    05-14-2010
    Location
    Coachella, CA
    Posts
    5,954
    Still. Viper is the best and most reliable.

    Sent From My Rooted Galaxy Note 2 using Tapatalk

  20. #20
    TGC Lifetime Patron finald8ta's Avatar
    Join Date
    02-17-2011
    Location
    i live in sunny florida
    Posts
    1,240
    Holiday area. But im all over port richey.

    Sent from my LG-LS970 using Tapatalk
    MODS

    5 speed swap
    Eibach Pro Kit on GR2 Struts
    Cold Air Intake
    Outlander Intake Manifold
    6G72 V6 Throttle Body
    6G72 V6 Fuel Pump
    Axle Back Exhaust (ebay)
    Evo Fuel Rail
    Evo Radiator
    Rear Disc Swap
    Prothane Motor Mount Inserts


    im getting 25mpg city and 30mpg highway untuned!!!

Page 1 of 2 12 LastLast

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •