Post What You Did To Your Car or Bought Today!

[2002BlackDragon]

I hear ya man. Those still look great

Sent from my Z796C using Tapatalk

[finald8ta]

The car isn't clean at all. But here they are. Disregard the open hood. Still need to repair the front end





Center caps will go this week

Sent from my iPhone using Tapatalk

What paint did you use?
Im liking the color too. I have todo minor repairs to mine and ill be painting them too.

Sent from my LG-LS970 using Tapatalk

[2002BlackDragon]

Yeah, what paint you guys use to paint your wheels? I'd also like to know what your using to paint the engine bays?

Sent from my Z796C using Tapatalk

[DTP]

Finally finished debadging the trunk and polished my tail lights again, much better!




Sent from my iPhone using Tapatalk

[Palmz]

Finally finished debadging the trunk and polished my tail lights again, much better!




Sent from my iPhone using Tapatalk

Nice work.. have you thought about geting some spacers?

[DTP]

Nice work.. have you thought about geting some spacers?

Yeah, once I roll the fenders I'll buy a set. I'm also waiting to find another set of wheels...


Sent from my iPhone using Tapatalk

[CHICAGO_ONE]

Yeah, what paint you guys use to paint your wheels? I'd also like to know what your using to paint the engine bays?

Sent from my Z796C using Tapatalk

Rust oleum wheel paint and clear coat. Also layed down self etching primer first.



Sent from my iPhone using Tapatalk

[oakrdrs187]

What size are those tires?

They look kind of small, making the wheel look like it needs a spacer. Usually eclipse wheels fill the wheel well pretty good.

Sent From My Rooted Galaxy Note 2 using Tapatalk

[CHICAGO_ONE]

Mine are 225/40/18


Sent from my iPhone using Tapatalk

[oakrdrs187]

^^^ Haha, I mean on Drews G, even the front wheel looks really sunk in.

Now im wondering if the fender was pulled.

Sent From My Rooted Galaxy Note 2 using Tapatalk

[CHICAGO_ONE]

Ahhh I see what your looking at. Damn. Does look sunken. LoL


Sent from my iPhone using Tapatalk

[DTP]

What size are those tires?

They look kind of small, making the wheel look like it needs a spacer. Usually eclipse wheels fill the wheel well pretty good.

Sent From My Rooted Galaxy Note 2 using Tapatalk

^^^ Haha, I mean on Drews G, even the front wheel looks really sunk in.

Now im wondering if the fender was pulled.

Sent From My Rooted Galaxy Note 2 using Tapatalk

Ahhh I see what your looking at. Damn. Does look sunken. LoL


Sent from my iPhone using Tapatalk

I'm running the 205/40s that came with them... I wheel and deal a little so I picked these up cheap (pun intended).

I'm looking to get a set of 215/45/17 for future use

But here's the old set



Sent from my iPhone using Tapatalk

[DEADEYES]

Yeah, once I roll the fenders I'll buy a set. I'm also waiting to find another set of wheels...

You going to get rid of the gsx wheels? or keep em as spare shoes?

[DTP]

You going to get rid of the gsx wheels? or keep em as spare shoes?

Spare set, possible AutoX wheels


Sent from my iPhone using Tapatalk

[DEADEYES]

Spare set, possible AutoX wheels

Cool deal.

[8thLS6]

This page just makes me want another set of wheels or refinish my current set lol..nicely done fellas

[Palmz]

I was always missing my driver side tweeter cover and i found two tweeter covers today for cheap from a 2000 jdm i was organly going to buy just the one but i thought it looks a bit off so ill buy em both... and i was right the JDM tweeter covers are some what bigger and dont fit to the usdm brackets (by like 3mm)


Anywhozyz thought it trough that out there
also might get my hands on a jdm side skirt from the same car. should i try to remove the rib-its from the inner sideskirt when i pick it up or?

[XsinshineX]

got this put in after 2 days. Didn't realize how much of a pain in the ass it was going to be. Now all that's left is to do some work to the radio bezel.

[CHICAGO_ONE]

The Bezel isn't too hard. Use QuikSteel putty.

While your screen is in the car and the bezel is installed...place duct tape or packaging tape on the bezel to mark the edges. Take the bezel out, keeping the tape on and press in the QuickSteel putty from the back. Go slightly over the edges of the tape. Let it cure, mark the edges with a marker, remove the tape.
You should be flush with the rest of the bezel. All you have to do it trim the edges with a dremel and then paint it

OR

Tightly wrap your screen in clear plastic wrap or aluminum foil and press the putty around the edges. Don't leave it there too long to cure as it gets kind of hot.
Then just block sand it and trim/smooth the edges... paint and done.





the HVAC controls need to be mounted further back. That take a decent amount of rigging.

[XsinshineX]

The Bezel isn't too hard. Use QuikSteel putty.

While your screen is in the car and the bezel is installed...place duct tape or packaging tape on the bezel to mark the edges. Take the bezel out, keeping the tape on and press in the QuickSteel putty from the back. Go slightly over the edges of the tape. Let it cure, mark the edges with a marker, remove the tape.
You should be flush with the rest of the bezel. All you have to do it trim the edges with a dremel and then paint it

OR

Tightly wrap your screen in clear plastic wrap or aluminum foil and press the putty around the edges. Don't leave it there too long to cure as it gets kind of hot.
Then just block sand it and trim/smooth the edges... paint and done.





the HVAC controls need to be mounted further back. That take a decent amount of rigging.

thanks for the tip on the quicksteel putty. i'll try the first way by using tape to mark it. my climate controls are sitting in-between the bezel and the dash that's why its sticking out so far. I tried mounting it to the backside but it looked too far back in the bezel. I've got a few ideas to experiment with to see if I can get mounted to look as good as yours lol