The Galant Center - Powered by vBulletin

Thread: General 8G Question Thread

Page 22 of 33 FirstFirst ... 1218192021222324252632 ... LastLast
Showing results 421 to 440 of 650
  1. #421
    TGC Lifetime Patron Palmz's Avatar
    Join Date
    04-14-2011
    Location
    Iceland
    Posts
    533
    Hey isnt there supose to be a one-way vent here?
    This is behind the rear bumper on the passanger side


    And aren't there supose to be plastic caps in these holes? behind the rear quarter panel under the car

    2001 Galant 2.4 USDM
    Old ones
    2X BMW E34 Blaaackkkk
    Isuzu Trooper mountain spec

  2. #422
    TGC Lifetime Patron Black8GV6's Avatar
    Join Date
    07-02-2011
    Location
    South Florida, by the beach
    Posts
    1,076

    ^ 1st pic yeah, it's kinda a one way vent, 2nd pic It's not a cap but a rubber hose for draining.
    15 F150 3.5 ecoboost 4x4 - daily driver
    01 Galant ES V6 MT (sold)
    00 Eclipse RS MT

  3. #423
    TGC Lifetime Patron Palmz's Avatar
    Join Date
    04-14-2011
    Location
    Iceland
    Posts
    533
    ait thanks man...

    does anybody have a part number for eather one of the items i need or a term to search for on ebay. cant seem to find it

    OR is anybody parting out a 8g?
    2001 Galant 2.4 USDM
    Old ones
    2X BMW E34 Blaaackkkk
    Isuzu Trooper mountain spec

  4. #424
    TGC Lifetime Patron Black8GV6's Avatar
    Join Date
    07-02-2011
    Location
    South Florida, by the beach
    Posts
    1,076

    15 F150 3.5 ecoboost 4x4 - daily driver
    01 Galant ES V6 MT (sold)
    00 Eclipse RS MT

  5. #425
    TGC Lifetime Patron Palmz's Avatar
    Join Date
    04-14-2011
    Location
    Iceland
    Posts
    533
    HEY!!! need answers quick
    I'm in the middle of painting my headlight housing black and i was wondering for those who have done this if you heated the old glue/putty and put the headlight back to gether that way or if you used addistional glue / putty

    ps. its almost 12pm the car needs to be out of the garage by tomorow and the glue that i haveis white not black like i thought
    2001 Galant 2.4 USDM
    Old ones
    2X BMW E34 Blaaackkkk
    Isuzu Trooper mountain spec

  6. #426
    TGC Lifetime Patron Black8GV6's Avatar
    Join Date
    07-02-2011
    Location
    South Florida, by the beach
    Posts
    1,076

    There should be enough glue from when you pulled them apart, just reheat, connect the pieces, then use like a big C-clamp with cloth to keep pressure so it seals good
    15 F150 3.5 ecoboost 4x4 - daily driver
    01 Galant ES V6 MT (sold)
    00 Eclipse RS MT

  7. #427
    TGC Lifetime Patron Palmz's Avatar
    Join Date
    04-14-2011
    Location
    Iceland
    Posts
    533
    Thanks for the tips wouldnt have tought of useing c grips :)
    2001 Galant 2.4 USDM
    Old ones
    2X BMW E34 Blaaackkkk
    Isuzu Trooper mountain spec

  8. #428
    TGC Lifetime Patron Palmz's Avatar
    Join Date
    04-14-2011
    Location
    Iceland
    Posts
    533
    Does anyone know if the locking mechanism for the drivers door is the same for jdm and usdm?

    Not in the mood to tear into my usdm to check it out

    Sent from my GT-I9505 using Tapatalk
    2001 Galant 2.4 USDM
    Old ones
    2X BMW E34 Blaaackkkk
    Isuzu Trooper mountain spec

  9. #429
    PuristMike
    Guest
    I'm almost certain they are

  10. #430
    TGC Regular boosting90's Avatar
    Join Date
    05-14-2014
    Location
    Central Florida
    Posts
    426
    Ok. Are the 99-01 and the 02-03 headlights are the same? (I looked google, here....)

    Im currently a 01. I want a 03front.

    I found headlight (crystal black housing) tht say 02-03. And others say 99-03.

    Thz guys in advance.

  11. #431
    Experienced TGC Member njjfudge's Avatar
    Join Date
    02-28-2005
    Location
    Jonesboro, GA
    Posts
    1,447
    Quote Originally Posted by boosting90 View Post
    Ok. Are the 99-01 and the 02-03 headlights are the same? (I looked google, here....)

    Im currently a 01. I want a 03front.

    I found headlight (crystal black housing) tht say 02-03. And others say 99-03.

    Thz guys in advance.
    Yes

    2001 w/Old Style VR-4 front conversion

  12. #432
    TGC Regular boosting90's Avatar
    Join Date
    05-14-2014
    Location
    Central Florida
    Posts
    426
    Hate to a pain. Just dont want to waste money. Im sorry if i am.
    So i can buy the "02-03headlights" and keep my grill(01)?

    Really appreciate.

  13. #433
    Quote Originally Posted by boosting90 View Post
    Hate to a pain. Just dont want to waste money. Im sorry if i am.
    So i can buy the "02-03headlights" and keep my grill(01)?

    Really appreciate.
    I'm not 100% sure, but I thought the 99-01 headlights were chrome housing finish, while the 02-03 were black housing finish? The fitment is the same though, so you can keep your grill. But your requirement of going with with the 03 front would require you to change the grill, if you go with the 03 bumper cover as well. Remember the 03 has a nose between the two grills, while the 99-01 has the single grill with a bumper cover without a nose.

  14. #434
    TGC Regular boosting90's Avatar
    Join Date
    05-14-2014
    Location
    Central Florida
    Posts
    426
    Awesome..... thx guys. Just tryin to stand out here in orlando fl. Since is all about hondas.... i did had one lol but i want some different mfrom others. Thx

    And if i go jdm front bumper. Do i have too go jdm headlight????

    Just undecide what front i want.

    Does any one know where can i get the vrg front lip? I love the lip on the 03bumper. :-)
    Last edited by Voodoo; 05-28-2014 at 09:05 AM

  15. #435
    TGC Lifetime Patron Palmz's Avatar
    Join Date
    04-14-2011
    Location
    Iceland
    Posts
    533
    Alright dont want to start a new thread about this since these problem dont realy bug me thaaat much but here i go;

    When i back up into my parking spot ( i go from making a full left turn and hit reverse and make a full right turn) there is a litle squeaky noise from the steering i think its from the steering rack, does not happen if i do a full right turn and then a full left turn and only happens when i hit reverse between these two turns. and yes there is enough fluid on the power steering resivor it does have a small leak tho (the only leak my 140k mile galant has) i mean ive gotten to a point where i only check on it when i do oil changes and that stuff usually full

    another problem my exhaust is hitting my rear swaybar at low rpm (stock exhaust btw and stock swaybar) and it makes a rumbling noise and i rev the car a little the noise goes away, haven't realy looked that much into this one im suspecting a broken motor mount but then again this is almost as far away from motor mount u could be.

    please if anyone has any tips or tricks please reply and sorry for my bad grammar

    these problems have bin going on for months never realy bug me that much unless someone in the passanger seat has the nerve to point them out ( I need ejector seats )
    2001 Galant 2.4 USDM
    Old ones
    2X BMW E34 Blaaackkkk
    Isuzu Trooper mountain spec

  16. #436
    TGC Regular foxbrand's Avatar
    Join Date
    06-18-2011
    Location
    chicago suburbs, IL
    Posts
    600
    That squeak could be your power steering belt, also check your tie rods (thinking worst case). Finally, how old are your tires?

    Check the hangers and the rubber from hanger-to chassis mounts. That also suspiciously sounds like a loose heat shield to me, what engine do you have?
    Just because something is old, doesn't mean you throw it away

    Geordi La Forge

  17. #437
    TGC Lifetime Patron Palmz's Avatar
    Join Date
    04-14-2011
    Location
    Iceland
    Posts
    533
    2.4l I4 my tires are only about a year old lots of tread left the one back tire is fkn old tho its on its last breath and waiting to get changed out
    2001 Galant 2.4 USDM
    Old ones
    2X BMW E34 Blaaackkkk
    Isuzu Trooper mountain spec

  18. #438
    Yeah, I'd check the power steering pump/belt. And the exhaust could be a hanger or the rubber on the hanger. Or a heat shield somewhere.

    Sent from my Z796C using Tapatalk
    Currently on my 3rd 8G... Not giving up this time!

  19. #439
    Does any part of the gauge cluster besides the odometer use a 74 bulb? My key ring isn't lighting properly but the led is good, so now I have one to spare. Already have the odom, cig lighter, hvac, and ash tray led equipped. Anywhere else I can use a 74 bulb?

    Thanks

  20. #440
    TGC Lifetime Patron Palmz's Avatar
    Join Date
    04-14-2011
    Location
    Iceland
    Posts
    533
    Help! im trying to order of of ebay.co.uk and i want to be sure im ordering for the jdm not the usdm car what is the body trim called EA???? or something like that...

    BTW the registrastion says EA0 but i get zero results for that.

    trying to order stuff like tie rod ends and bearing
    2001 Galant 2.4 USDM
    Old ones
    2X BMW E34 Blaaackkkk
    Isuzu Trooper mountain spec

Page 22 of 33 FirstFirst ... 1218192021222324252632 ... LastLast

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •