How she sits right now. Sorry for the crappy pics
"If one day the speed kills me, do not cry because I was smiling"
-Paul Walker #rememberthebuster
How she sits right now. Sorry for the crappy pics
"If one day the speed kills me, do not cry because I was smiling"
-Paul Walker #rememberthebuster
-Andrew
Last shot of the 3G. Bought a 4th gen on Saturday so I'll have it by Friday
Sent from my iPhone 5 using Tapatalk Pro.
Last edited by Rach3T8G; 05-28-2014 at 03:13 PM
- Chris -2006 Mitsubishi Eclipse GS 5MT: My DD
2001 Mitsubishi Eclipse GS 5MT
________________________________________________
DRL Delete | 6K HIDS | AUX Cord Wired in RF Head Unit | DC Sprots CAI | OBX Longtube Header | Aero Turbine 2540i Muffler
Contemplating on if I should keep the color of the grill the way it is (and put some clear coat on) or paint the grill black or something closer to it (before I put the mesh on)
Opinions are always widely accepted lol
Sent from my Nokia 3310
Thats nice can you do that to my stock grill
Looks good man! Wasn't clipped in was it? You should go with a graphite color + clear
XD - I made that for him. Let me know if you want one. I can get a spare and send it out to you.
Sent from my iPhone using Tapatalk
Last edited by CHICAGO_ONE; 05-28-2014 at 03:23 PM
THANX but Chicago_One is your guy! he did a great job with it! i just did the painting.
my first time actually using the rattle can on anything [hence the dark spots]. i have some G35 wheels in my backyard that i might take a try at! lol
thank you man! it ws clipped in but just by one clip up top. more than likely thats why it kinda awkward lookin at the bottom haha.
any recommendations on paint [like paint number and all that]? i tried ford gray and it ws the SAME COLOR as the primer lol. the color in the picture i think is duplicolor engine enamel Cast Coat Iron.
the gutter guard mesh is black for sure!
LoL. I used rusto wheel paint on my rims and they came out pretty dark grey. Otherwise I've just grabbed whatever looked good off the shelf from autozone. Viper Graphite I think was one color.
Sent from my iPhone using Tapatalk
As far as performance I'll keep it NA just to see if I can make 200whp then all my turbo parts I'll use on the 4th gen once I upgrade pistons, rods and find someone to fabricate a t4/t3 manifold. It's a GS
Sent from my iPhone 5 using Tapatalk Pro.
- Chris -2006 Mitsubishi Eclipse GS 5MT: My DD
2001 Mitsubishi Eclipse GS 5MT
________________________________________________
DRL Delete | 6K HIDS | AUX Cord Wired in RF Head Unit | DC Sprots CAI | OBX Longtube Header | Aero Turbine 2540i Muffler
I'll try to get a picture up tomorrow or Saturday
Sent from my iPhone 5 using Tapatalk Pro.
- Chris -2006 Mitsubishi Eclipse GS 5MT: My DD
2001 Mitsubishi Eclipse GS 5MT
________________________________________________
DRL Delete | 6K HIDS | AUX Cord Wired in RF Head Unit | DC Sprots CAI | OBX Longtube Header | Aero Turbine 2540i Muffler
Congrats on the 4G Chris!
-Greg
"I smashed up the grey one, bought me a red;
Every time we hit the parking lot we turn heads!"
-Pimp C, "International Players Anthem"
"If one day the speed kills me, do not cry because I was smiling"
-Paul Walker #rememberthebuster
-Andrew
You look lower in your sig, Ideally for me as well; that's the perfect height in your pic you just posted. Not too low that it's no longer practical.
Chris, congrats on the 4g! Hopefully she has the rockford fosgate system, I love the look of the one sub between the two seats in the 4g.
Lancer/EvolutionX Rotor Glow Paint
6g74 Forged Engine w/ hx40 turbo
Eclipse GT 5 spd swapped
Rotor Glow Galant
Daily Galant
OZ Edition Eclipse
Ready for the 1/4 mile tonight
![]()
15 F150 3.5 ecoboost 4x4 - daily driver
01 Galant ES V6 MT (sold)
00 Eclipse RS MT
Bookmarks