No caliper compressor? No problem!
Got one basically done. I need to get another stud tomorrow and a caliper compressor/c clamp
No caliper compressor? No problem!
The front spindles are done besides the ball joint and black paint.
Working on the rear right now. Removing two layers of plasti dip and two layers of paint.
Also need to repair/replace the sway links. Stripped the 14mm bolt to stop it from splitting. Might get a nut splitter
The paint layers on those calipers reminds me of the VW "harlequin" edition golf
1994 Galant GS - Daily driver
1994 Galant LS - Parts car
Garage: http://www.thegalantcenter.org/garag...iew-20241.html
Ball joints came in but I feel like my grandfather ordered the wrong ones. Are upper ball joints about this size?
Rear is about done
5 lug disc Complete! Just in time for school tomorrow lol
i dont like these ball joints at all. I have them on my green Galant and I tell you what it cant turn for shit. It messes up the caster by alot
I have adjustable SPC ball joints. Before I put them in I measured all the suspension angles and mine were in dead straight. No change in caster or anything. I was really cautious
2014 Lancer Evo GSR
1996 Galant S 5 Speed Turbo
Need a Turbo rebuilt or upgraded--> http://www.thegalantcenter.org/showt...ebuild-Service
these are the turning ones, not the sliding ones. When you turn it yes it changes the camber, but it also changes the caster. These cost about 45 bucks and the good ball joints are around 160
Lancer steelies
-16" x? Offset ?
-Yokohama Avid S34 205/60/16
No rubbing and the same height I had it
Next projects/mods maybe?
-1G throttle body
- 1G Headers
- 2G Exhaust
No need for headers or throttle body. Just a nice exhaust. I miss when mine was stockish sometimes
2014 Lancer Evo GSR
1996 Galant S 5 Speed Turbo
Need a Turbo rebuilt or upgraded--> http://www.thegalantcenter.org/showt...ebuild-Service
Installed the 2g eclipse sway bar and one of the bolts I used broke. Charging the drill and will probably change the other 3.
(Don't mind the Filipino DIY exhaust lol)
6 hour drive, worth it :D
Thanks to Cody for helping me get these for a steal
Glad I could help my dude!
Bookmarks