**official aggressive wheel thread**

[[DC_eightG_00]]

Mine are like that because its a 3pc wheel

Exactly. Same here

[E_Emerson88]

I think they do it that way since they are reverse mount. I could be wrong though.

[cleazy123]

No more max wheels ? What are you rockin now?

[hellaflushgalant]

Hi i have a 1999 Mitsubishi Galant and i need to get at least 3-5 negative camber in the rear so my wheels don't rub i have tried everything and nothing works my wheels are 18x9

[RedGalant2k1]

What are your wheels offset?

What is your tire size?

Has the can been aligned since it was lowered?

Have you rolled the rear fenders since installing the wheels?

[hellaflushgalant]

The tire size is 225 45 r18, the offset is 28mm, the ride hight is stock and yes they are rolled. I went to a performance shop and they told me i needed to have rear camber and i don't know where i can buy a kit or the parts to make it have camber i haven't found anything

Any help is greatly Appreciated, Thanks

[RedGalant2k1]

Camber Kit

[Blue8g]

Your tires are also too tall.

[oakrdrs187]

Theres nothing aggressive about +28 18's wrapped in the wrong tire size on stock ride height.

Sent From My Rooted Galaxy Note 2 using Tapatalk

[hellaflushgalant]

So where can I rear Camber kit for the 99 Galant any links or brands will help

Thanks

[Blue8g]

The rear will camber in when lowered.

You should do that.

9j +28 has to look super dorky at stock height.

And get the right size tires.

And just search 'camber kit' on here.

[oakrdrs187]

Ingalls makes a good kit. Go on ebay and search for it.

Lowering the car to a flush stance is at least a 2.5in drop, with Tein springs lowering the rear 1.3 inches my alignment spec sheet came in at about 2.9 to 3.1 negative in the rear with no camber kits. Simply lowering the thing with coil overs will probably get you where you need to be.

Sent From My Rooted Galaxy Note 2 using Tapatalk

[hellaflushgalant]

Thanks i appreciate all of your Help!

[4g63lover]

17x9 +35 up front +27 effectively in the rear. Needed an 8mm slip on in the rear because the tire rubbed the arm that goes from the hub to the uppercontrol arm. Going to put some extended lug studs on it probably next week.

The tires is a 255/40/17 Hankook RS3. -3 camber in the rear and about 0 up front. Still need to get her on an alignment rack







BTW, this bitch is running and driving and she is trouble.

[RedGalant2k1]

255s you are a crazy man!!

[4g63lover]

if i could put bigger tires on I would this thing needs it. a little bit of boost and its instant tire smoke.

[M-Rod]

I'm lovin' the new setup Jigz!

[dronesurfboards]

how are you liking the rs3's? im looking for some tires for road course fun this season. I was debating between the rs3's or the Potenza s-04 pole position.

[4g63lover]

Thanks Matt!!

Drone, on other cars theyre awesome. I havent had enough time with them on BabyG just yet but I have high hopes

[6G72gearhead]

255's are where its at! I'm hoping to figure out how to fit a 275-295 front for some epic corner carving!