I am NOT going to spill anything in this thread

[mrg7243]

Yes it is and I have one. Just wanted to make sure the line was long enough.

Sent from my SM-N910V using Tapatalk

[mrg7243]

The intercooler is now hard mounted. Not too much left now.

[Galantman03]

Are you going to bolt the intercooler to something or is it going to just sit in that?


Sent from my iPhone using Tapatalk

[mrg7243]

There is a top strap as well I put on today. But never took pictures.

This is also all temporary. Once I have the car broken in and all of the kinks fixed I am changing alot of little things.

Sent from my SM-N910V using Tapatalk

[Galantman03]

Hopefully the vibrations won't erode a hole into the tanks. That Crap happens fast too


Sent from my iPhone using Tapatalk

[mrg7243]

All the edges have been covered in rubber. I take vacuum line. Slice it down the middle and it folds over all sharp edges.

Sent from my SM-N910V using Tapatalk

[mrg7243]

"Final" looks for the bay.

[boosting90]

Love it

Sent from my SM-G386T using Tapatalk

[mrg7243]

So a little incident happened. I had my friend pop the timing cover off to get a bolt that fell in there. He got the bolt out and I asked him to check around to make sure there was nothing else. Well he missed a nut which destroyed my timing on the first crank. Couple chunks and tears are all on the belt.



Sorry for the dim lit potato pic

[boosting90]

Noooo. Smh. Damn. :(

Sent from my SM-G386T using Tapatalk

[mrg7243]

Big Update
Put a new timing belt on. Started the car. Drove it about 5 miles total so far. It needs to be tuned asap.

https://youtu.be/IV_7dbH2IY4

[boosting90]

Big Update
Put a new timing belt on. Started the car. Drove it about 5 miles total so far. It needs to be tuned asap. Working with English Racing on that.

<iframe width="560" height="315" src="https://www.youtube.com/embed/IV_7dbH2IY4" frameborder="0" allowfullscreen></iframe>

Is it still snowing bad out there? Clicked on link and sayin input not specified. Maybe is my end. But glad u got it runnin again.

Sent from my SM-N920T using Tapatalk

[spdracr]

The video isn't working for me either.

[boosting90]

Im thinkin is the same video he post in FB.

Sent from my SM-N920T using Tapatalk

[spdracr]

I'm sure it is.

[mrg7243]

It was the same video. I copid the post over from another forum post is why. Ill fix that.

The weather is finally starting to look good. Going to have English racing tune the car.

[FooseGalant]

Worked fine for me. The happy shit eating grin at the end says it all. **Success**
Congrates

[mrg7243]

Been working on the car here and there. On the second revision of the tune, many more coming. Its needs an alignment bad and the rear fenders rolled tons more.

IMG_3565 by Matt Gartner, on Flickr

IMG_3561 by Matt Gartner, on Flickr

IMG_3562 by Matt Gartner, on Flickr

IMG_3564 by Matt Gartner, on Flickr

Current state of the interior. Getting a dash in the coming weeks so I can put my new headunit in. Exhaust, and random rattles gets real old to drive with.

IMG_3566 by Matt Gartner, on Flickr

I put leds in the dome lights and loved them for the minute it was in there.

IMG_3567 by Matt Gartner, on Flickr

Smoke poured out everywhere. Gotta love chine led junk.

New headunit and roller. One of these days ill get around to rolling the fenders getting it aligned and slammed back down.
IMG_3560 by Matt Gartner, on Flickr

[8thLS6]

Nice progress, but as far as the leds could you use these http://www.ebay.com/itm/2pcs-White-1...BVsabV&vxp=mtr

[mrg7243]

As always it has been awhile. Got a bunch of parts in, broke some parts, ect.

But I am on the homestretch now to be in line to make it to h2oi.

Finished the battery box in the trunk



120amp breaker


And my favorite mod to date. APR GT3 mirrors with carbon mounting plates made by me.






also shows my new front fenders Thanks again Anas!



Loomed up some of my wiring while the trans is out





Also bought a tig machine. I have a crack on my transmission to repair and an exhaust on this as well..



But as of now I am broke, and going into my last semster. So all of the parts I have been hoarding will be going on in the next month. Hopefully with a wrap job.