power window buttons sinking in

[trougtyr]

My controls on my door are sinking in. Does anyone know how to fix this
content://media/external/file/47336

- - - Updated - - -

Damn guess idk how to post pictures lol. Basically it just looks like my buttons keep slowly falling further and further down to where i can barely push them

[dac9050]

The buttons are held in place by clips/Screws. You need to remove the door panel and you can see if the clips maybe broke or the screws that attach to the plastic piece of the door trim.

Sent from my SM-N910T3 using Tapatalk

[trougtyr]

Okay thanks

[FooseGalant]

The plastic that holds the buttons in place is made of PVC plastic that gets very brittle over time (especially here in AZ). The part has so much material hogged out for weight saving that the pieces do not hold together. I took mine apart and reinforced all the joints with epoxy and plastic sheet.

The buttons are held in place by clips/Screws. You need to remove the door panel and you can see if the clips maybe broke or the screws that attach to the plastic piece of the door trim.

Sent from my SM-N910T3 using Tapatalk