Post What You Did To Your Car or Bought Today!

[justin13]

So about a week ago my car wouldn't start but it turned over and I had to go to school and we were leaving for vacation so she sat till we got back. While I was gone I did some research and determined it was the fuel pump hopping it wasn't the intake manifold. today I replaced it and she was back to life

Here's the old one



Sent from my iPhone using Tapatalk

[trougtyr]

That took WAY less time than I thought it would.

Sent from my XT1585 using Tapatalk

How about that write up


Sent from my iPhone using Tapatalk

[seanske99]

Picked these up on Tuesday. 2.4L 5 Spd transmission, shifter cables, and shifter.


Sent from my iPhone using Tapatalk

[Blue3000GTguy]

How about that write up


Sent from my iPhone using Tapatalk

Coming write-up!
Get it, right up? Because write up? Oh, I crack myself up​.

Picked these up on Tuesday. 2.4L 5 Spd transmission, shifter cables, and shifter.


Sent from my iPhone using Tapatalk

Big things happening on TGC again. Liking this a lot. :) Can't wait for more swaps!

Sent from my XT1585 using Tapatalk

[trougtyr]

Coming write-up!
Get it, right up? Because write up? Oh, I crack myself up​.


Big things happening on TGC again. Liking this a lot. :) Can't wait for more swaps!

Sent from my XT1585 using Tapatalk

You're so...punny
Thanks blue!


Sent from my iPhone using Tapatalk

[Blue3000GTguy]

You're so...punny
Thanks blue!


Sent from my iPhone using Tapatalk

Honestly it's so stupid easy it won't take any time to do the write up. It's all about moderation

Sent from my XT1585 using Tapatalk

[RedGalant2k1]

I bought new D2 Coilovers and Invidia N1 Exhaust for the Galant.

[cg1349]

I had the throttle body cleaned. Still idling too low. Will sell this car soon.

[yhkwok]

Not today, but just installed my new Thinkware F50 w/ hardwire kit.
Also finished the heated mirror project, I will probably do a write-up thread soon.

Then checking my older pictures, I remember about my steering wheel control project, probably another write up :)

O yeah, just came back from the junkyard with 06 Outlander front calipers and a pair of headrest, I was a bit worry if they will match well with my 3G black leather seats, because I got those off from the back seat of the Outlander, and the leather just looks fantastic in condition, good that I don't have many wrinkles on the seats near the shoulder area, so now they looks just like they're meant to be there, only they are a bit taller than the 3G headrest.

Still deciding if I will do the big brake upgrade, but if I'm doing it, together I'll probably put stainless brake lines and new pad + rotors on, gonna be fresh :P Perhaps get them painted as well, Black/Blue/Red

[paulo]

I'm just gonna leave this here

[Blue3000GTguy]

I'm just gonna leave this here

I see dohc swap futures

Sent from my XT1585 using Tapatalk

[paulo]

I do have a spare KIA head sitting in the back, along with an OEM evo 8 Intercooler. I would like to do DOHC>Manual>boost

[Blue3000GTguy]

I do have a spare KIA head sitting in the back, along with an OEM evo 8 Intercooler. I would like to do DOHC>Manual>boost

You do know that the Evo valve cover does not fit the Hyundai head, yes?

Sent from my XT1585 using Tapatalk

[paulo]

I do! That up there is a one of a kind Valve cover my good sir.

[Blue3000GTguy]

I do! That up there is a one of a kind Valve cover my good sir.

Well, carry on then. Did you have it made or do it yourself?

Sent from my XT1585 using Tapatalk

[paulo]

Had my fabricator friend do this for me.

https://www.youtube.com/watch?v=qv3R-lyghfQ

He made a vid explaining the process, I just received it, finished smoothing it out a bit and painted it

[Blue3000GTguy]

Had my fabricator friend do this for me.

https://www.youtube.com/watch?v=qv3R-lyghfQ

He made a vid explaining the process, I just received it, finished smoothing it out a bit and painted it

Well that's pretty legit. If he ever made another one I'd definitely be interested in it.

Sent from my XT1585 using Tapatalk

[paulo]

Junkyard score

[gtx]

Junkyard score

Well there you go, good find!

[TD86_]

Had my fabricator friend do this for me.

https://www.youtube.com/watch?v=qv3R-lyghfQ

He made a vid explaining the process, I just received it, finished smoothing it out a bit and painted it

I've seen that video before! Lucky!!