Let's see if this is applicable to your bumper lights specs.
All the lights in the bumper only have one swith in the dashboard, beside the steering column, it can be found on the outer side. ( a dummy switch is installed, if you still don't have one) It is the vertical switch.
The wiring set-up that we have here is that you have to switch on your park lighs first before the bumper lights can be swithed on, even if they have a separate switch.
The round projector lights is the first one to illuminate. When you swtich to high beam, the round ones go out and the rectangular goes on. Don't know how they did the wiring.
Haven't tried opening the assembly.
Be careful with the screws securing the white cover on the sides, the cover can easily break if you screw it on too tight.
Bookmarks