rear knuckles? help

[nelly123]

does anyone know where i can find rear knuckles for my car other than goin to a mitsu dealership. i def need a new pair cus my car is makin this loud ass noise in the back. so if anyone can help please do

[rfpa1]

check www.mitsubishiparts.com or www.rockauto.com

I have ordered from them also if you do get them and install them get all the bolts from the dealer before you start working. In case you have to cut, you have the bolt right there.

It should take you about 1 to 2 at worst 3 hours per side.

[nelly123]

thanks, for the help. i think i found them for like 50 bucks cheaper than dealer price on that one site. still expensive, but atleast thats 50 dollars in my pocket

[Ositoyb]

check with Bronxbomr(i forget his screen name) but he is parting his car, and he had a LOT of new parts he install befor ethe accident. check with him, and see if he has anythign you need, im pretty sure you'll get a better price with him.

[IllestGalant]

I know you are replacing them because the bushing is worn were it meets
the upper control arm. a company named HELP makes bushings that
are not meant for it but they slide right into the hole with a little lube. you just have to take the one bolt out, grind out what little is left of your old bushing and slide the new one through. back in goes the bolt and walla.
I spent five bucks and some time and the 1200 the dealership would charge is now going to take my ass to the bar

[GalantSpeed]

<div class='quotetop'>QUOTE(IllestGalant)</div><div class='quotemain'>....not meant for it but they slide right into the hole with a little lube. </div>

did any one else find that funny?