19s....

[galantv600]

aight i ran a search n nothin came up... i dunno what happend cuz i know there is somethin out there on this... anyways what size do the 19s need to be wit the TEIN drop? 8)

these the rims by the way.... yes i know back is wider.. im gone see if i can get just 4 of the front ones but what size they needa be?

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...&category=38662

[Danger DANJ]

Forget it, those rims will not fit a Galant. Atleast, not without serious modifications to the car.

Did you ever see the post I made in your last thread about some rims you were looking for?

[galantv600]

i just saw that part bout the actual link to the forum thread... anywho i want 19s that look like that and will fit.. do any of you guys know where i can get some like taht?!?! yo DANGERDANJ thanks for the help n patience man!

[Danger DANJ]

These BC Forged rims are hot as hell. Click here. I'm not sure if they have an offset that will work, but I would definitely check.

Have you seen these 5Zigen wheels yet? If I were getting 19's, these are the ones I'd get. Click here. Unfortunately only the 20" 3-piece version has the rivets. Click here.

The 5Zigen Copse rims have a clean look. Click here.

The ADR X-Factor rims look alot like the Hamann rims, but they won't fit either because the offset will be too low. I believe for our bolt pattern, the only offset available is +35mm which would stick the rim out too far from the car.

There are a couple other brands that have a design like the Hamanns, but either they don't come in 19" or they have too low of an offset.

The Volk Racing GT-C's are kind of hot. Click here.

R-1 Racing Wheels have 3 similar designs, but they are chrome. Plus I'm not sure if they have offsets that will fit. Click here.

[galantv600]

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...&category=43959

so will these fit no problem on my ride? i got the TEIN drop by the way....

[Danger DANJ]

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2456066522&category=43 959

so will these fit no problem on my ride? i got the TEIN drop by the way....

Well, as far as width and offset go, it would be close. They might stick out from the fenders a tad bit and even rub the fenders. But alas, those particular ones on ebay won't fit because they don't have the proper bolt patterm. They are 5 x 112 and our 8G's are 5 x 114.3...sorry.