Post What You Did To Your Car or Bought Today!

[DTP]

humm checked and saw nothing

Photobucket is being a pain... Un momento, por favor ;)

[DTP]

https://www.thegalantcenter.org/show...766#post705766

[99 galant]

Drove the galant over 300 miles in a few days, just trying to get it running consistantly again

[Exhaust power]

Did my alignment and took a pic of my dtc.

[Rach3T8G]

Changed my oil, oil filter, switched back to my stock wheels, destroyed my passenger side fender, & might of screwed up my axle as well

[zobgel]

This just came today!

[RedGalant2k1]

Yay! New suspension!

[mrg7243]

This just came today!

you will love them. which series did you get?

[galantlvr34]

Changed my oil, oil filter, switched back to my stock wheels, destroyed my passenger side fender, & might of screwed up my axle as well

How did you mess up the fender?

[keith6110]

rotated the tires, replaced tie rod ends, changed the oil + filter, adjusted camber again, and installed an injen CAI + new filter. Then I washed the car =)

[mrg7243]

We need picts of the low!!!!!

[Rach3T8G]

How did you mess up the fender?

After i put on my stock wheels i was driving to the gas station around the corner to put air in the tires & half way there my passenger wheel fell off. Maybe using wheel locks isn't such a good idea

[keith6110]

After i put on my stock wheels i was driving to the gas station around the corner to put air in the tires & half way there my passenger wheel fell off. Maybe using wheel locks isn't such a good idea

Usually aftermarket wheels have tapered lug holes meaning you need to use tapered lugs. If you tried using these with stock mitsubishi wheels, they would have never tightened properly (even though they seemed to be tight). For stock mitsu wheels you need flat edge lug nuts.

It's the only reason I can think of as to why your wheel may have fallen off lol. Good thing you weren't going fast though, could have been bad.

[Rach3T8G]

Would i have to get those from a mitsu dealer? & yea things could of been worse. Going to go look at it now & see what my problem is exactly

[M-Rod]

Dorman makes the correct lug nuts as well. Part # 611-117

[Shadow19]

Got my new clutch installed. Liking the sprung 6 puck. Man that thing is grabby as hell!

[midnight]

took off my jdm heads

[finald8ta]

order a set of prothane motor mount insert and a shift knob from amazon.com.

I couldn't pass up that deal

[8thLS6]

Hey post if you get a call from ontario canada since you purchased from amazon. Both my mom and aunt have bought from them recently..and now both of our house phones get calls from ontario. My mom and my aunt were discussing it one day, and after having similar stories and finding it strange, my aunt called the police. Turns out it's a scam. They advise not to pick up the phone. I don't know how the scam works or who is supposedly involved. This is just a heads up, especially if your in VA like me. I don't know who they target or how they decide, etc.

[Skyforger]

Say hello to the G's new shoes:



98 Mustang Cobra wheels!