PDA

View Full Version : Installing remote control central door lock - how?



LivArt
11-20-2011, 03:49 AM
Hi,
I want to buy aftermarket keyless entry. I want to instal it to galant '94 (lhd). I found that locks in galant are controled by minus.

Central door lock has this two diagrams:
http://i39.tinypic.com/2qa7ho3.jpg
http://i40.tinypic.com/15mmwkn.jpg



Where to connect keyless entry?

oakrdrs187
11-20-2011, 01:56 PM
I don't understand what you mean by "central door lock".

It is true the car requires negative pulse to a certain wire in order for it to lock or unlock. Usually these wires are found in the drivers side kick panel.

LivArt
11-20-2011, 02:04 PM
central door lock - that thing, wich allows you to lock/unlock all doors in car at same time using one lock.
And I want to add remote keyless. But I don't know, what wires I can use.

justin
11-21-2011, 01:08 AM
When u buy one it usually has a diagram or booklet tells u how to install it and what wires go to what..... And yea man I couldn't understand u either I just guest lol..... He isn't from the US I dnt think

qnz
11-21-2011, 08:41 AM
Are the 7g Galants wired the same way as 2g Eclipses? There are some good tutorials on www.dsmtuners.com (http://www.dsmtuners.com) on how to wire in alarms/keyless entry. IIRC, the door trigger wires run to behind the radio.

LivArt
11-21-2011, 08:51 AM
Thank you for that website :-)

BTW I wan to install keyless entry to my galant 94, thats all. I have connection diagram for that keyless remote and I have diagram of my galant and don't know where to connect that (I know keyless must "send" a negative to some wire to lock and to another to unlock, but I dont know what wires I can use).

ricky_db
11-21-2011, 09:12 AM
for just a keyles entry setup it is very easy only six wires (about)

LivArt
11-24-2011, 03:02 PM
I'm just looking for control wires. Wich of them are they?

w/oarctic7g
11-24-2011, 03:29 PM
Why not tie in within the door at the three wires from cylinder switch red/green, black and green/white?

LivArt
11-24-2011, 04:26 PM
three wires from cylinder switch red/green, black and green/white? That's what I've looking for - color of wires, that comes from switch. I've seen about 5 variants to connect and I didn't know the right version. Many thx for all :thumbup::yes:

oakrdrs187
11-24-2011, 05:05 PM
It is easy. But on a foreign G im not sure if the colors are same as USDM.

This is a screen capture I took. Its from the Directechs wiring site, membership is needed. I looked up a usdm and it was the same as this picture which is for Canadian mitsus. Check both door harnesses.

http://i1199.photobucket.com/albums/aa472/vipergtsr96/photobucket-9086-1322175704626.jpg

LivArt
11-25-2011, 03:01 PM
It looks the same as in diagram in first post. But I found a mistake here: theres changed positions of doors (master controller is on left door on lhd cars, but there's on the right door in this picture). These pictures are from oficial galant wiring diagram.

I'll take some photos when I'll install keyless.

oakrdrs187
11-25-2011, 04:21 PM
As long as it works.

justin
11-25-2011, 07:21 PM
Yea seeing the 94-96 are considered DSMs lol :-P

rockingout92
11-27-2011, 11:56 AM
Pretty sure that there are newer galants than 96 that are dsm's... hah.