Printable View
Is that the 4g64 iac?Quote:
Originally Posted by underated
Yep.Quote:
Originally Posted by deeznutz
Bleed the brakes...
http://i739.photobucket.com/albums/x...2-13_965-1.jpg
Also before i put the harness in the car, is there anything i should do if i plan on running dual maps.... Once its in its in lol
How r u bleeding them alone??
They already have speed valves on them pull rubber cap off I think unscrew it a little and then just pump the brakes bleeds them if I remember check me on that.
I didn't know he had speed valves on them. How much and where do I get them??
My 13 yr old brother wanted to help lol free workersQuote:
Originally Posted by spdracr
You checked wrong lol. Just regular nipplesQuote:
Originally Posted by bgood12
Nope, no speed bleeders. Google them for evo, they should pop upQuote:
Originally Posted by spdracr
ATE blue???
Oh yeah! (koolAide man voice)Quote:
Originally Posted by xd_01
Will these work for us on 99 factory two pot calipers
http://www.summitracing.com/search/B...c&autoview=SKU
lol!Quote:
Originally Posted by galantman03
That's a good question, ill let you know tomorrowQuote:
Originally Posted by jubeiaire
No I think the bleeders on the stock calipers are way thinner maybe an m6 not a 10. If galantmann doesn't check tomorrow text me and I could look at the spare calipers that I haveQuote:
Originally Posted by jubeiaire
These are the part number for speed bleeders that fit evo brembos posted by 02redgalant here:
https://www.thegalantcenter.org/show...ghlight=brembo
Brake bleeder spec: 10mm x 1.0 x 33mm(31mm will work also)
Pepboys #12706 $9.89/pair
NAPA #675-1570 $11.69/pair
Kragens #12706 $11.xx/pair
Speedbleeder #1010S $14.xx/pai
So the thread 10x1.0 is the same , the ones i looked at are just .02mm longer over all.
Now the unanswered question is , will they fit the 99-00 OEM 2POT (DUAL) Calipers? i dont have the single pot.
After i typed that i found these, 10.1.0 x 33mm same company
http://www.summitracing.com/parts/RUS-639630/ still need to know if these fit my breaks....off to bed ill check answer in the morning
Considering I'm working with a set of brembos and a set of dual pistons and I remember seeing both and the brembo bleeders are bigger. I will measure it tomorrow just shoot me a reminder.
Quote:
Originally Posted by xd_01
For a second I thought you had DOT5 in there, the DOT5 we use is near that color.Quote:
Originally Posted by Galantman03
Doesn't look like it, but i have the single pistons up front, and it looks like M8mmx1.0Quote:
Originally Posted by jubeiaire
Its DOT 4Quote:
Originally Posted by wetamup2k3g
Actually it is M7x1.0 I measured them today and that's confirmed.Quote:
Originally Posted by Galantman03
What is so special about the ATE blue?? Excuse my ignorance but I know nothing about this topic.
Ok couldnt really tell.
It has a higher boiling point compared to other dot 4 fluids, and also doesnt eat up seals that quickly on the calipers. Color is just a plus lol
Where can I get it from??
Amazon, but MAPerformance is the cheapest that i have seen