Galantman03's 8G Build

[Galantman03]

the tips are different on the iac's

Is that the 4g64 iac?

Ok that's why the look darkened...

Yep.

Bleed the brakes...


Also before i put the harness in the car, is there anything i should do if i plan on running dual maps.... Once its in its in lol

[spdracr]

How r u bleeding them alone??

[bgood12]

They already have speed valves on them pull rubber cap off I think unscrew it a little and then just pump the brakes bleeds them if I remember check me on that.

[spdracr]

I didn't know he had speed valves on them. How much and where do I get them??

[Galantman03]

How r u bleeding them alone??

My 13 yr old brother wanted to help lol free workers

They already have speed valves on them pull rubber cap off I think unscrew it a little and then just pump the brakes bleeds them if I remember check me on that.

You checked wrong lol. Just regular nipples

I didn't know he had speed valves on them. How much and where do I get them??

Nope, no speed bleeders. Google them for evo, they should pop up

[xd_01]

ATE blue???

[Galantman03]

ATE blue???

Oh yeah! (koolAide man voice)

[jubeiaire]

Will these work for us on 99 factory two pot calipers

http://www.summitracing.com/search/B...c&autoview=SKU

[xd_01]

oh yeah! (koolaide man voice)

lol!

[Galantman03]

Will these work for us on 99 factory two pot calipers

http://www.summitracing.com/search/B...c&autoview=SKU

That's a good question, ill let you know tomorrow

[spdracr]

Will these work for us on 99 factory two pot calipers

http://www.summitracing.com/search/B...c&autoview=SKU

No I think the bleeders on the stock calipers are way thinner maybe an m6 not a 10. If galantmann doesn't check tomorrow text me and I could look at the spare calipers that I have

[OMEGA PHX]

These are the part number for speed bleeders that fit evo brembos posted by 02redgalant here:
https://www.thegalantcenter.org/show...ghlight=brembo

Brake bleeder spec: 10mm x 1.0 x 33mm(31mm will work also)
Pepboys #12706 $9.89/pair
NAPA #675-1570 $11.69/pair
Kragens #12706 $11.xx/pair
Speedbleeder #1010S $14.xx/pai

[jubeiaire]

So the thread 10x1.0 is the same , the ones i looked at are just .02mm longer over all.

Now the unanswered question is , will they fit the 99-00 OEM 2POT (DUAL) Calipers? i dont have the single pot.



After i typed that i found these, 10.1.0 x 33mm same company
http://www.summitracing.com/parts/RUS-639630/ still need to know if these fit my breaks....off to bed ill check answer in the morning

[spdracr]

Considering I'm working with a set of brembos and a set of dual pistons and I remember seeing both and the brembo bleeders are bigger. I will measure it tomorrow just shoot me a reminder.

[wetamup2k3g]

ATE blue???

Oh yeah! (koolAide man voice)

For a second I thought you had DOT5 in there, the DOT5 we use is near that color.

[Galantman03]

Now the unanswered question is , will they fit the 99-00 OEM 2POT (DUAL) Calipers? i dont have the single pot.

Doesn't look like it, but i have the single pistons up front, and it looks like M8mmx1.0

For a second I thought you had DOT5 in there, the DOT5 we use is near that color.

Its DOT 4

[spdracr]

Doesn't look like it, but i have the single pistons up front, and it looks like M8mmx1.0


Its DOT 4

Actually it is M7x1.0 I measured them today and that's confirmed.

What is so special about the ATE blue?? Excuse my ignorance but I know nothing about this topic.

[Galantman03]

Ok couldnt really tell.
It has a higher boiling point compared to other dot 4 fluids, and also doesnt eat up seals that quickly on the calipers. Color is just a plus lol

[spdracr]

Where can I get it from??

[Galantman03]

Amazon, but MAPerformance is the cheapest that i have seen