I got those if you want them. I'll pm you with details...
Printable View
Ok i need clarification because theres some misuse of terms here. Are these size 194? Are there 4 of these in each headlight for the HALOS, not the stupid LEDs on the sides? I want the HALO RINGS to be brighter and a different color, but i'm not gonna run the side LEDs at all. When these rubber boots pop out can i replace them with a 194 LED inside of that rubber boot, is there some sort of connector in there?
I dont think theres a connector.. it might be straight up
I just got these.. but I'm back at the same problem i had before...
has anyone tried different kinds of wiring formats?
I want to have everything off at the first setting on the lighting lever, I want to have The parking lights (halos & LEDS) ON at the second setting of the lever, and the low beams at the final setting of the lever ( also known as the night lights)
so wire ur halos and LEDs to the turn signal wire for low filament. That's how I run my Halos. I don't run the LEDs. Do you want the LEDs and Halos OFF when ur low beam is on?
Nah the only problem is that my car had Daytime Running lights. so the low beams are always on. I can bypass that and put them as the second setting on the lever and they come on with the parking lights, and there is no diff between the middle and final setting. what i want to be able to somehow just have the parking lights on and everything else off lol... but i don't mind if the last setting has everything on.
ooh.. idk pull your DRL fuse out??
Yea i was thiking about pulling fuses out until one them does somethinglol
Hey Serstylz2 check this out...
http://autolumination.com/906.htm
just ordered some white LEDs for my halos, will post pix when they arrive.. these stock bulbs are only noticeable at night if theres no other lights whatsoever around hah
I know.. they are garbage.. lol If they do work.. post the link and part # so i can buy them aswell lol..
i just put in my low beam HID's yesterday.. I love them :)
has anyone tried to open these lights yet?
Can they be heat gunned? or ovened? lol I'm trying to mod the interior to my liking, but before i fuck ship up.. i wanna make sure they upen just as easily as the others.
Any ideas?
heres the LEDs i ordered, still not here
http://cgi.ebay.com/ebaymotors/ws/eB...tab%3DWatching
did anyone else's pass. headlight fit like absolute crap?? driver's side was good, pass side, my top tab is basically pointing straight up in the air all bent and not usable
just got my LEDs today, threw em in, it makes a world of difference, pix coming when its darker
my passanger fit just as fine as the drivers, I have about a 1/4 inch gap underneath tho.
http://i138.photobucket.com/albums/q...s/P7150569.jpg
http://i138.photobucket.com/albums/q...s/P7150570.jpg
http://i138.photobucket.com/albums/q...s/P7150571.jpg
http://i138.photobucket.com/albums/q...s/P7150572.jpg
http://i138.photobucket.com/albums/q...s/P7150573.jpg
http://i138.photobucket.com/albums/q...s/P7150574.jpg
http://i138.photobucket.com/albums/q...s/P7150579.jpg
http://i138.photobucket.com/albums/q...s/P7150580.jpg
http://i138.photobucket.com/albums/q...s/P7150568.jpg
may get rid of my low filament on my turn signals
Any problems installing this lights with the JDM bumper and grille?