EBAY Projector Headlights

**es_fact** · 06-19-2009, 10:55 PM

Originally Posted by The Professional

low beam only for right now.. and surprisingly I was able to install them myself. Lesson learned I guess.. I was able to get them properly aimed too so the light output is pretty decent. I want HIDs in my fogs next.. so I was planning to cop some of those Optilux 2500 Angel Eyes. Does anybody know the HID bulb that would go in those?

I got those if you want them. I'll pm you with details...

**Serstylz2** · 06-20-2009, 07:20 PM

Originally Posted by 01galant01

Here is what I mean:

Don't worry about the cut wires, didn't want the heads for the halos. They pull out pretty easy, and there are four for each halo. Just give it a little tug.

Ok i need clarification because theres some misuse of terms here. Are these size 194? Are there 4 of these in each headlight for the HALOS, not the stupid LEDs on the sides? I want the HALO RINGS to be brighter and a different color, but i'm not gonna run the side LEDs at all. When these rubber boots pop out can i replace them with a 194 LED inside of that rubber boot, is there some sort of connector in there?

**es_fact** · 06-21-2009, 04:10 AM

I dont think theres a connector.. it might be straight up

**es_fact** · 06-25-2009, 03:14 PM

I just got these.. but I'm back at the same problem i had before...

has anyone tried different kinds of wiring formats?

I want to have everything off at the first setting on the lighting lever, I want to have The parking lights (halos & LEDS) ON at the second setting of the lever, and the low beams at the final setting of the lever ( also known as the night lights)

**SkylineG1** · 06-25-2009, 10:42 PM

Originally Posted by es_fact

I just got these.. but I'm back at the same problem i had before...

has anyone tried different kinds of wiring formats?

I want to have everything off at the first setting on the lighting lever, I want to have The parking lights (halos & LEDS) ON at the second setting of the lever, and the low beams at the final setting of the lever ( also known as the night lights)

que?

**Serstylz2** · 06-25-2009, 10:58 PM

so wire ur halos and LEDs to the turn signal wire for low filament. That's how I run my Halos. I don't run the LEDs. Do you want the LEDs and Halos OFF when ur low beam is on?

**es_fact** · 06-26-2009, 12:02 AM

Originally Posted by Serstylz2

so wire ur halos and LEDs to the turn signal wire for low filament. That's how I run my Halos. I don't run the LEDs. Do you want the LEDs and Halos OFF when ur low beam is on?

Nah the only problem is that my car had Daytime Running lights. so the low beams are always on. I can bypass that and put them as the second setting on the lever and they come on with the parking lights, and there is no diff between the middle and final setting. what i want to be able to somehow just have the parking lights on and everything else off lol... but i don't mind if the last setting has everything on.

**Serstylz2** · 06-26-2009, 07:03 AM

ooh.. idk pull your DRL fuse out??

**es_fact** · 06-26-2009, 10:08 AM

Yea i was thiking about pulling fuses out until one them does somethinglol

Hey Serstylz2 check this out...

http://autolumination.com/906.htm

**Serstylz2** · 07-07-2009, 01:24 PM

just ordered some white LEDs for my halos, will post pix when they arrive.. these stock bulbs are only noticeable at night if theres no other lights whatsoever around hah

**es_fact** · 07-07-2009, 01:30 PM

I know.. they are garbage.. lol If they do work.. post the link and part # so i can buy them aswell lol..

i just put in my low beam HID's yesterday.. I love them :)

**es_fact** · 07-09-2009, 10:42 AM

has anyone tried to open these lights yet?

Can they be heat gunned? or ovened? lol I'm trying to mod the interior to my liking, but before i fuck ship up.. i wanna make sure they upen just as easily as the others.

Any ideas?

**Serstylz2** · 07-15-2009, 01:24 PM

heres the LEDs i ordered, still not here

http://cgi.ebay.com/ebaymotors/ws/eB...tab%3DWatching

**4g63lover** · 07-15-2009, 01:35 PM

Originally Posted by es_fact

has anyone tried to open these lights yet?

Can they be heat gunned? or ovened? lol I'm trying to mod the interior to my liking, but before i fuck ship up.. i wanna make sure they upen just as easily as the others.

Any ideas?

info on this would be great, I want these lenses for my retrofit.

**Serstylz2** · 07-15-2009, 03:59 PM

did anyone else's pass. headlight fit like absolute crap?? driver's side was good, pass side, my top tab is basically pointing straight up in the air all bent and not usable