Post a pic as your car sits now....

Printable View

06-07-2009, 06:48 PM
Galante

Nice! What color is she gonna be?
06-07-2009, 06:57 PM
mko

Hot Rods red

http://i232.photobucket.com/albums/e...edhrftruck.jpg
06-07-2009, 07:27 PM
Galante

Kewl color! I bet it's gonna be hot.
06-07-2009, 07:54 PM
Voodoo

Quote:

Originally Posted by mko

http://i232.photobucket.com/albums/e...6/DSC00105.jpg[/IMG]

:082: I love it
06-07-2009, 08:41 PM
ShiZnitH

Quote:

Originally Posted by Galante

you changing color if you have to paint the whole car? Might as well if i were you.

Next season its gonna get repainted since Mitsubishi used bad paint on 03++ models :rolleyes: The colour is gonna be black but with blue pearls innit :biggrin:
06-07-2009, 09:13 PM
glantv699

Looks like you're almost there Chris, can't wait to see the new paint + wheels etc
06-07-2009, 10:43 PM
Stewi

Quote:

Originally Posted by mko

Hot Rods red

http://i232.photobucket.com/albums/e...edhrftruck.jpg

is it gonna be flat just like that? SICK!!!!!!!!
06-07-2009, 11:09 PM
mko

yeap, i already purchased the paint. it was like $60 for a quart
06-07-2009, 11:21 PM
Voodoo

Quote:

Originally Posted by 00galantguy

I know that drive way lol. Mitch scrapes on it.

Mitch is taking it at the wrong angle ;) This is the right angle:

http://i279.photobucket.com/albums/k...wRotors073.jpg

http://i279.photobucket.com/albums/k...wRotors074.jpg

http://i279.photobucket.com/albums/k...wRotors076.jpg
06-08-2009, 12:01 AM
02redgalant

patriot red ftw
06-08-2009, 12:10 AM
glantv699

Blurry camera phone as dusk approaches FTL

http://i95.photobucket.com/albums/l1...531092041a.jpg
06-08-2009, 08:11 AM
00galantguy

Quote:

Originally Posted by Voodoo

Mitch is taking it at the wrong angle ;) This is the right angle:

http://i279.photobucket.com/albums/k...wRotors073.jpg

http://i279.photobucket.com/albums/k...wRotors074.jpg

http://i279.photobucket.com/albums/k...wRotors076.jpg

Lol . Car looks good dude.
06-08-2009, 08:17 AM
QnzMostWanted

as of this morning

http://i143.photobucket.com/albums/r...1/dsc01400.jpg

http://i143.photobucket.com/albums/r...1/dsc01399.jpg

dont mind the missing fogs, thats another project :D
06-08-2009, 08:42 AM
run1206

looks good! :thumb:
06-08-2009, 09:06 AM
Ivory8g

D the v6 is comin out clean!!
06-08-2009, 09:59 AM
SPD_FRK

Matching wheel gap muwahahaaha
http://i228.photobucket.com/albums/e...5091950-00.jpg

Also my objective to beat once engine 2 is done lol
06-08-2009, 10:15 AM
Asierra_999

sad sad day, I got hit in the rear and broke my hub my tire rolled off after I slammed my rear drum into the ground!! Thank god for insurance! Gah I hate bad drivers!!!! FUCk

http://i8.photobucket.com/albums/a8/...4333149441.jpg

http://i8.photobucket.com/albums/a8/...4333174411.jpg
06-08-2009, 10:57 AM
mitsu_vic

http://i285.photobucket.com/albums/l...c/IMG_2732.jpg

If all goes right this will be the last photo as a 2003 stock galant, new style here I come.
06-08-2009, 07:30 PM
9G

nice.
06-08-2009, 09:57 PM
Stewi

making progress over here....

the subframe cut prior to install... I have made a few more little cuts not in the pic. Pretty much each of those windows I cut into the subframe I needed to extend another half inch towards the driver side, and the center most window also I had to cut a little lower.

http://i3.photobucket.com/albums/y83...e/PICT1715.jpg

http://i3.photobucket.com/albums/y83...e/PICT1716.jpg

turbo kit in for a test fit and to build the lower downpipe...

http://i3.photobucket.com/albums/y83...e/PICT1720.jpg

http://i3.photobucket.com/albums/y83...e/PICT1722.jpg

lower downpipe just clearance the transfer case, everything has Vband connections for fast removal and reinstallation for changing the tcase fluid or other work.

http://i3.photobucket.com/albums/y83...e/PICT1724.jpg
06-08-2009, 10:07 PM
fatal1

very clean brian...looking good, like i said if you need a hand let me know...im free this weekend coming up for the most part
06-08-2009, 10:31 PM
Stewi

I might take you up on that. I usually refrain from asking for help, not because I dont want it, but because of my hectic weekends. I may wake up at 8am, work on the car til 10, shower, go out with my wife for 3 hours, come home, work on the car again for 2 hours, shower, go back out, come home at like 7pm and work on the car til 12am, then the following day I just crash because im beat.
06-08-2009, 10:55 PM
Voodoo

Stewi on TGC = VTEC KILLER on Club3G?
06-08-2009, 11:25 PM
jojo03

yup
06-08-2009, 11:29 PM
Voodoo

Ripped my exhaust manifold off tonight so Mitch (Galant306m) can fix a couple leaks and install my EGT probe. Thanks love :biggrinlove:

http://i279.photobucket.com/albums/k...anifold006.jpg

http://i279.photobucket.com/albums/k...anifold009.jpg

... And I found this ... One of the bolt holes on the downpipe flange broke :(

http://i279.photobucket.com/albums/k...anifold012.jpg
06-09-2009, 12:31 AM
fatal1

Quote:

Originally Posted by Stewi

I might take you up on that. I usually refrain from asking for help, not because I dont want it, but because of my hectic weekends. I may wake up at 8am, work on the car til 10, shower, go out with my wife for 3 hours, come home, work on the car again for 2 hours, shower, go back out, come home at like 7pm and work on the car til 12am, then the following day I just crash because im beat.

no doubt i hear that im the same way...i will give you a call tomorrow and we will see whats good...as long as your buying me lunch too i dont mind going out with the wife lmao j/k
06-09-2009, 12:46 AM
Galant306m

Rob that Manifold sucks all the welds where crappy, and nice down pipe lol the guys and TopStreet need a lesson in machining, and welding.
06-09-2009, 05:26 AM
ShiZnitH

Quote:

Originally Posted by Voodoo

Ripped my exhaust manifold off tonight so Mitch (Galant306m) can fix a couple leaks and install my EGT probe. Thanks love :biggrinlove:

... And I found this ... One of the bolt holes on the downpipe flange broke :(

Wich turbo are u using?
06-09-2009, 06:17 AM
Stewi

Quote:

Originally Posted by fatal1

no doubt i hear that im the same way...i will give you a call tomorrow and we will see whats good...as long as your buying me lunch too i dont mind going out with the wife lmao j/k

lol
06-09-2009, 09:59 AM
Voodoo

Quote:

Originally Posted by Galant306m

Rob that Manifold sucks all the welds where crappy, and nice down pipe lol the guys and TopStreet need a lesson in machining, and welding.

You could give them a lesson... if they were still in business :icon_lol:

Quote:

Originally Posted by ThaShiZnitH

Wich turbo are u using?

Precision SC61
06-09-2009, 07:18 PM
Stewi

Quote:

Originally Posted by Voodoo

You could give them a lesson... if they were still in business :icon_lol:

Precision SC61

Is it a 6152 or a 6157? Is it the stage 3 or stage 5 turbine?

I have the same turbo, it started as a 6152E stage 3 and now its a 6152SP stage 5.
06-09-2009, 10:44 PM
4g63lover

glad you're getting the welds fixed Rob!

Now, onto bigger injectors to fix the break up up top.
06-10-2009, 12:01 AM
Voodoo

Quote:

Originally Posted by Stewi

Is it a 6152 or a 6157? Is it the stage 3 or stage 5 turbine?

I have the same turbo, it started as a 6152E stage 3 and now its a 6152SP stage 5.

It's a 6152E. Not sure what stage it is
06-10-2009, 06:55 AM
HungarianHunter

http://i138.photobucket.com/albums/q...7/IMG_4042.jpg
06-10-2009, 04:33 PM
00galantguy

Just hand washed her.

http://i54.photobucket.com/albums/g9...610091558b.jpg
http://i54.photobucket.com/albums/g9...610091558a.jpg
http://i54.photobucket.com/albums/g9...610091557b.jpg
http://i54.photobucket.com/albums/g9...0610091556.jpg
http://i54.photobucket.com/albums/g9...610091555c.jpg
http://i54.photobucket.com/albums/g9...610091555a.jpg
http://i54.photobucket.com/albums/g9...610091554b.jpg
http://i54.photobucket.com/albums/g9...0610091554.jpg

Sorry for the crap ton of pics!
06-10-2009, 04:38 PM
HungarianHunter

00GalantGuy that looks really nice man!
06-10-2009, 05:11 PM
Galante

Good job!
06-10-2009, 05:45 PM
Voodoo

Lookin' good Trav.
06-10-2009, 05:47 PM
QnzMostWanted

looks like it was rattle can painted
06-10-2009, 05:50 PM
00galantguy

Quote:

Originally Posted by QnzMostWanted

looks like it was rattle can painted

and it was... cuz its getting a full paintjob shortly. its not even cleared yet...