^That will be awesome! I hope they do.
Printable View
^That will be awesome! I hope they do.
The LSD movement is gaining traction.....pun intended!
ok, that was corny, I apologize
#CruelSummer2013!! *clicks imaginary Like button*
Finished up my new audio install today
http://i1109.photobucket.com/albums/...7f1b0a8ae0.jpg
http://i1109.photobucket.com/albums/...1af4f1e52d.jpg
http://i1109.photobucket.com/albums/...625372b58b.jpg
Since the wall blocks my trunk light I added LED strips to each side to add some illumination.
http://i334.photobucket.com/albums/m...ps8328892e.jpg
Got a nice wash and wax after a mud bath
http://i334.photobucket.com/albums/m...ps88182eed.jpg
Lights on. Still waiting for my other fog light ballast from DDM that was faulty
http://i334.photobucket.com/albums/m...pscf40be1a.jpg
Put on my logo
http://i334.photobucket.com/albums/m...pse6671c23.jpg closeup
You know youre supposed to remove the clear part right?
I'm glad more people are getting LSDs, they make driving the cars so much better
Quote:
Originally Posted by M-Rod
Quote:
Originally Posted by wetamup2k3g
Yeah with all the LSD talk these days, Jigz's BabyG unfortunate situation and since I'm opening the trans due to a oil leak, I just want to take that off my list of concerns.Quote:
Originally Posted by greddy
Lol I figured that but I couldn't do it, when I peeled it a piece of the paper got stuck to it and I had to carefully peel that offQuote:
Originally Posted by oakrdrs187
Small update, doing a first time retrofit with an unknown set of projectors I pulled from a yard.
https://sphotos-b.xx.fbcdn.net/hphot...51725731_o.jpg
i was thinking about snagging some dual projector audi heads from pick n pull.. thoughts? worth it or order just projectors online?
For jdm heads cant go wrong with either TSX or S2K projectors.
^^S2K's are pricey, but SO worth it if you're an HID fiend like myself. Their output with a clear lens is perfect. Those and LS430's, can't be beat. However, THEY ARE NOT CHEAP!
TSX's are good, TL's are worlds better (but hard to pull off cleanly), FX-R's are great, RX330's are great, especially with a curved shield mod, they're on par with the S2K's once you put a curved shield in.
However, Audi HID's probably use the Hella design like the Mercedes E55's, BMW E46's, and Evo X's (which are the newest design) and those are all great projectors too, can't go wrong with either.
If you get them from a pick-n-pull, check out the bowls, make sure they are clean, not oxidized, not scratched. All that kills output. If so, just head over to TRS and order some EVOX-R projectors if you're dead set on that style of projector, or any of the other ones they have, the Morimoto ones require little to no cutting to install. Hope this helps, good luck!
I soooo need to move already so I can do my own retrofit....
that helps tons thanks!Quote:
Originally Posted by wetamup2k3g
Here it is, almost done with it. Need to adjust and clean the lens. (Ignore gaps, didn't bolt in right away as I need to change a few things beforehand)
https://sphotos-a.xx.fbcdn.net/hphot...85894501_n.jpg
Quote:
Originally Posted by OMEGA PHX
I'll do that when i go in to cut some more on the rad support, i was in a rush to get it going that nightQuote:
Originally Posted by M-Rod
Anyone by chance have the clips for the bulbs on the JDM headlights
What about the Mini H1's??Quote:
Originally Posted by dknight3
they should, PR is a US territory, I'll be joining the LSD club this summer as wellQuote:
Originally Posted by OMEGA PHX
got my ground wire kit in earlier today, I'm installing it Thursday
I know my engine bay is dirty but I finally put on the powder coated stuff spdracr did for me. New plugs and plug wires, new gaskets.
The FSM said 39 inch pounds for the valve cover bolts, my torque wrench does foot pounds, so is inch pounds is pretty much a little bit over hand tight?
Before
http://farm9.staticflickr.com/8359/8...d44594bf9c.jpg
After
http://farm9.staticflickr.com/8125/8...45c063ff_c.jpg
I'll get a day light pic after work, my flash kinda bleached out the purple, it looks better in the day light.
Installed a ebay oval muffler on Tuesday that replaced the N1 that basically fell apart.
Then today i made a quick vid on how it sounds. In person its quieter then the N1 there's a hint of rasp at redline which i never hear under load. Overall its decently smooth and not obnoxious i can listen to my stereo now but still hear the muffler when im on the throttle..
http://www.youtube.com/watch?v=LRyh6O6v9ic
So the fedex guy came:
http://i195.photobucket.com/albums/z...pse50f3442.jpg
http://i195.photobucket.com/albums/z...pse4d656ba.jpg
Just ordered the speed gear and bearings ;)
^ nice Good Shit. I'm still waiting to use mine. LOL
The LSD is going to get a beating.