wow
thanks man
heres another one:
this one was kinda blurry
wow
looks really clean 6G72Galant
that a KYB/AGX setup?
02 Mit. Galant 5 Spd -> 2010 Mit. Lancer Sportback 5 Spd -> (current) 2014 Mit Evo GSR 5 Spd
run1206's Rear Disc Tutorial
run1206's CF Hood Resurface Tutorial
Nice. Looks like the fogs are filled w/ water. Did you removed the rubber ring on the back?
"Mitsubishi Galant(e) for Life"
Tuned 2013 Evolution X GSR PB
-> Follow me on IG @blackblurr_x | 5-Speed | Check out my Build Here
Some outside pictures...I really need to invest some money in a better camera lol
![]()
Thanks
Nope. D2 Racing coilovers. Ride is stiff, but much better than OE suspension.
LoL Yeh its just the drivers side though. I remember seeing a tutorial on how to solve that issue. Ima have to check again.
Trust me. By next spring/summer, this car is going to be whored out in CF. Ive got plans
Thanks for all the compliments guys.
^^ a drop. some camber. and a wash and that will be looking gooooood. good job on the wheels.
I am still waiting for the remaining parts (rotors and pads) for the Brembo setup to be complete for now. I also have a slight fitment issue with the driver's side rear caliper not fitting. It may be due to the suspension issue (sits 1/2" lower than passenger side), but will find out more when the rest of my parts get here.
The wheels are the 17" 350Z wheels, fronts are 17 x 7.5" and rears are 17 x 8", tires all around are 245/40/17. I wanted some meat for the canyons, and for the strip. I will start looking at suspension once I get the thing finished and driving, but I am pretty sure Ksports are going in
Hmm... why not start working on my car again.
![]()
'99 5-Speed GTZ: Forged 3.6L 6G74T 6764 E85
2017: 552whp/562wtq SBE on 19psi'02 Eclipse GT: 6G72 M/T-swapped Daily Driver'10 Endeavor: 6G75 AWD Family-mobile
Bookmarks