Post a pic as your car sits now....

**Predat-R** · 06-26-2010, 06:40 AM

Originally Posted by Fresh_617

the gauges are for show purposes at night they light up lol i soon hope to get the air ride then ill replace them with gauges to look at the bags...=/

or u can go 5spd and turbo then actually use the guages for desired intent

**Predat-R** · 06-26-2010, 06:42 AM

[QUOTE=Stewi;599375]

GRRRRRRRRRRRRRRRRRR , the postman is going to start throwing ur mail.

**Stewi** · 06-26-2010, 08:05 AM

The heads are 4500 and fogs 3000

**Galante** · 06-26-2010, 02:11 PM

Any Daytime shots Stewi?

**keith6110** · 06-26-2010, 03:49 PM

M/T swap with all swap parts and another engine. Engine was cheap so I bought that too.

**RAZ_76** · 06-26-2010, 04:04 PM

^^Sweet, good luck with that.

**beam514** · 06-26-2010, 05:35 PM

nice pick up keith! you got everything you need?

**keith6110** · 06-26-2010, 06:11 PM

Thanks guys ^^^

I have almost everything. I just need new axles and a new shift linkage. I'm going with a lightweight fidanza flywheel and a stage 1 clutch from exedy. I also need the reservoir cap for the clutch reservoir. Everything else I have. Even the M/T wiring harness and 2004 gts ecu. lol

**Stewi** · 06-26-2010, 06:49 PM

Originally Posted by Galante

Any Daytime shots Stewi?

Im gonna take some tomorrow after I wash her

**OMEGA PHX** · 06-26-2010, 08:49 PM

Rotational alignment has been corrected, step are too close I know I need to take care of that, In the next 2 days this should be DONE finally. excuse the cellphone pic

Shrouds haven't been glued

Just need to glue and wire the halos, jb weld the shrouds and wait for the jbweld to cure and finally close the headlights, unfortunately my lenses have some rock chips, I bought some Meguire PlastiX, bt by hand it isn't that efective, any recommendations do you guys think a little wet sanding and then spraying a clear coat and polishing would work?

**beam514** · 06-26-2010, 08:57 PM

how deep are the rock chips? you may be able to wet sand then polish with the plastic polish

**OMEGA PHX** · 06-26-2010, 09:31 PM

Originally Posted by beam514

how deep are the rock chips? you may be able to wet sand then polish with the plastic polish

The majority of the rock chips aren't that deep, I'm seeing a video of someone that wetsanded with 1000, 1500 and 2000 grit then a buffer with rubbing compound and then I think hi is using plastiX, but I don't have a buffer so it going to be elbow grease or a drill with a buffering pad or something. Mine aren't that bad so I think maybe the 2000 then the polish or 1500, 2000 then polish.