Log in
Register
Reply With QuoteTo pay for the steady flow of parts, and paint.Originally Posted by skrap
hurry up mko i want pics of the secret item installed
To pay for the steady flow of parts, and paint.
Pretty much.. He ALWAYS has somthing new.. I think on his 5th trunk lid now... LOL
I went through your whole build thread today and all i have to say is WOW!!!!. Great job!
I do have a question what type of paint did you use for this? i like how it has the OEMish look to it. And how well has it stood up to scratches??
NIce revival!! Its Satin black paint, the cheapest you can find in Walmart. It holds up good.
Now its been a while since my last post in this thread, and i have collected many parts. Here's a lil show off. Most likely engine wont be ready before MOD, but I hope me and Skrap will be able to put everything else on. I have a couple of things I dint take pictures, it will be a teaser for MOD.
Lets start with some interior stuff. I know its dirty.
Leather hand brake boot
Safc Neo
Diamante arm rest
Engine
Brian Crower valve springs and retainers
Revised lifters, OEM valves
ACL race bearings
Evo 3 oil cooling capable filter housing
Some of the things Ive posted before
Wiseco pistons 9.0:1 CR, STD bore
7 bolt Eagle Rods
ARP head studs
The entire head assembled with Evo 3 intake manifold
Evo 8 ECU
New set of backing plates with Evo brembo brakes
Power steering cooler off 97 Sonata.
Collected a few tools this summer
Pistons and rods are being shipped to FL to get balanced and put together with the correct clearances. i also bought a 3g crank, but the guy on club3g scammed me and i havent seen the crank
Brembo, Bitchiz!!
I see you got your Evo wheels on there too. Looks good. Doing the Evo Brembos up front too?
- Nick, 94 Galant ES - 4G64 DOHC Turbo AWD, E3-16G & Manifold, 780cc inj, fmic, DS-MAP Speed Density
"Ignorance more frequently begets confidence than does knowledge..." - Charles Darwin
oohhhhhh awesome dude! keep it up!
Ive been thinking about this for some time but never had the means to cut these off the bumper, so I went to the junk yard today armed with some cutting tools.
I got these off a Pontiac Grand Prix (the rear bumper to be more specific).
These seem to be a perfect fit to the rear bumper
Now I have to figure out a way to fit them with the rear mud flaps.
Installation pics to come
Last edited by mko; 10-25-2010 at 10:54 PM
Yeah I will, but these take time and some fabrication
Thanks bro
you are a very busy man chris. looks good so far. if you make it work with the flaps i will get the cutters ready!!
2014 Lancer Evo GSR
1996 Galant S 5 Speed Turbo
Need a Turbo rebuilt or upgraded--> http://www.thegalantcenter.org/showt...ebuild-Service
Also check out my "Rear Adjustable Toe Arms" thread right here. Its for 7g and 8g and its budget build
https://www.thegalantcenter.org/show...386#post625386
Theres more to come
Nice man. Are those eagle rods new or used? I remember about 3 years ago they had a big problem with bearing fitment, saying to use 1g bearings with 7bolt rods and they had issues even still. Just make sure yours are spec'd out properly. Thats how my original built evo 7 motor died, threw a rod bearing using those BS 1g bearings in the 7bolt rods like eagle suggested. Eagle has come a long way since then, they manufacturing tolerance and quality control have been very good as of late.
99' Galant ES
4G64/63T
AEM EMS
they are brand new, just sitting in the basement where is very humid. I sent the pistons and rods to a machine shop to have them put together within specs.
Nice
99' Galant ES
4G64/63T
AEM EMS
Sell me the evo ecu :-)
I'll text you about it tomorrow
'00 Mitsubishi Galant ES 4g64T (Samantha)
'01 Mitsubishi Galant ES 4g64 (Daily)
'02 Mitsubishi Galant ES 4g64 (SCRAPPED)
'00 Mitsubishi Galant ES 4g64 (SCRAPPED)
'91 Volvo 740 Turbo B230FT (SOLD)
'88 Mitsubishi Mighty Max (SOLD)
'91 Kawasaki ZX7 (SOLD)
'95 Kawasaki ZX9R
ur 7g has come a long way. It's defenty the sexiest 7g on tgc. Sorry galattuner10. Mko ur car has became one of a kind.
wow!your car is amazing.i remember like a year ago,it had different colored parts and such.it came a long way and like what you did to it..very niceeee.props!
WANNA LOOK FRESH????
GET SOME CLOTHES AT KARMALOOP.COM AND GET 20% ON FIRST PURCHASE WHEN USING REPCODE:KN21899
siniGANG represent!
Nah, I believe DohcStunr's Galant is far more complete than mine. I still get to do the DOHC swap and ECU upgrades.
Anyway, Thanks guys I appreciate that someone's still looking at my thread and actually paying attention
Posting Rules
2000 Mitsubishi Galant ES
Bookmarks