Well, it is at the shop where my car sits :D
Well, it is at the shop where my car sits :D
94 Galant GS: 4G67 head, 1G IM, Evo 8 TB, DeltaCam 272/264 Cams, Test Pipe, OE Avenger V6 60mm catback w/muffler, modified Outlander header, DIY COP setup, B/S delete, 315cc injectors, AEM UEGO WBO2, Black case 3G ECU
1994 GS FYI
DSM/CSM Manuals
94 Galant GS: 4G67 head, 1G IM, Evo 8 TB, DeltaCam 272/264 Cams, Test Pipe, OE Avenger V6 60mm catback w/muffler, modified Outlander header, DIY COP setup, B/S delete, 315cc injectors, AEM UEGO WBO2, Black case 3G ECU
1994 GS FYI
DSM/CSM Manuals
- Chris -2006 Mitsubishi Eclipse GS 5MT: My DD
2001 Mitsubishi Eclipse GS 5MT
________________________________________________
DRL Delete | 6K HIDS | AUX Cord Wired in RF Head Unit | DC Sprots CAI | OBX Longtube Header | Aero Turbine 2540i Muffler
I tried on a set before I got my wheels that I have now, the starions came with a staggered set-up stock and the starion fronts fit well on the rear on 8gs, but the fronts hit my caliper, and the starion rears were a little overkill IMO, but could be pulled off with a nice roll and stretch.
Stays Flossin'
Hey guys look what I did today!!
Complete how to thread here
https://www.thegalantcenter.org/showthread.php?t=45171
Its sanded down etc whatever, than hi-temp silver sparkle base coat, than a metalcast purple top coat, with a light dusting of the silver again for the flake effect. Did it in my garage lol, My friend did the same thing without the flake jawn and with blue,
![]()
Stays Flossin'
Got rid of all the front camber to be more practical, rear is next, Im riding on cords already from the 2 months ive been on these damn wheels.
Stays Flossin'
the car sat in a parkinglot while I was at work like this lol
![]()
Stays Flossin'
looks like too much negative camber
Camber and toe
OZ Rally Crew #001, Quaife Club member :D
Bookmarks