Post What You Did To Your Car or Bought Today!

[oakrdrs187]

Honda LED?

Sent From My Rooted Galaxy Note 2 using Tapatalk

[CHICAGO_ONE]

Getting started on something for spring :)


Sent from my iPhone using Tapatalk

[carl3g]

Honda LED?

Sent From My Rooted Galaxy Note 2 using Tapatalk

Idk Vic. The company is exLED from California. I know their products are from overseas though.

[Guzm4n]

Getting started on something for spring :)


Sent from my iPhone using Tapatalk

How did you get it split apart, I'm trying to do the same to an extra dash I have but haven't took a look at it yet

[Galantman03]

you have to heat up the plastic and then pull it apart. Not to bad but it does suck lol

[CHICAGO_ONE]

Yep^
That's how I did my door panels.
But for these, I snipped the little plastic tabs and drilled out the circular ones. Then Pulled the access plastic with pliers and snipped as necessary.

Got it apart in like 10 minutes that way. Kept all the plastic scraps for when I put it back together. Will use them to melt the tabs back together
Or just use a new glue.


Sent from my iPhone using Tapatalk

[8thLS6]

My p0300 was caused by a coil and bad ground straps.

There really isn't one definite fix for it. It's such a vague code that has lots of different ways to fix it.

Sent from my Galaxy S4

Now that u mentioned it I remember that, and it was a different code I had lol

[99galantES]

Idk how you guys remove the dash looks like it be a pain in the ass to take off and put back

[keith6110]

How did you get the airbag on the passenger side off without ripping the airbag panel? When I took the dash apart in my wrecked galant, I couldn't see a way to do it without breaking the panel.

[Galantman03]

How did you get the airbag on the passenger side off without ripping the airbag panel? When I took the dash apart in my wrecked galant, I couldn't see a way to do it without breaking the panel.

if you removed the glove box or the bottom portion entirely, there are bolts that hold the airbag cover on. I wish I knew that when I did mine. I just cut them lol There should be 4 of them if my memory is right, 2 on the front to in the back on the airbag module itself

Idk how you guys remove the dash looks like it be a pain in the ass to take off and put back

not really I can have mine out in 20 mins lol. the only sucky part is you have to remove your a pillar trim

[CHICAGO_ONE]

Yeh. It's not too bad. I pulled one at the JY and learned it all from there. I like working with spare parts first if I have a choice.


Sent from my iPhone using Tapatalk

[wetamup2k3g]

Doing brakes today. Went metal-to-metal. I thought I had wear indicators, I did not. Oh well.



I'm getting too old to be outside in the dark in the cold changing brakes. Shit is not fun.

[foxbrand]

did some touch up for the paint for my engine bay (black header paint and using a hair drier to get it to dry when it is 17 in my garage), next time it gets over 25 in my garage and I won't be mobbed by school work, it will be chasing that vacuum leak

[spdracr]

How did you get the airbag on the passenger side off without ripping the airbag panel? When I took the dash apart in my wrecked galant, I couldn't see a way to do it without breaking the panel.

As Jared said. There is 4 straps bolted down with a 12mm bolt. 2 in the back are harder to get to but it's can be done with the lower portion of the dash off. I took the passenger bag out of the scrapped car to see how it's done.

Sent from my Galaxy S4

[Celph Concepts]

gonna give these a try. they're going to have to be refinished and get at least two new tires for them but that will have to wait till next month after the tax checks come through :)

[8thLS6]

Went to install my replacment led bulbs I got off ebay, after the first pair burnt out in less than 5hrs. Same brand and all. The seller was nice enough to send the replacement, but that does me no good when they go bad like the first. Long story short don't get agt led bulbs for brake lights. The model I got has a cree led on top and numerous smd leds around the side. Waste of 20bux. Agt hid bulbs are good though

[Guzm4n]

Replaced my radiator since my old one had a crack in it

[CHICAGO_ONE]

Put in some HIDs and did the brakes on my father in laws eclipse.


Sent from my iPhone using Tapatalk

[JDyal]

Speaking of radiators, is there a particular brand or anything I should look for? Mine is cracked too

[Guzm4n]

Speaking of radiators, is there a particular brand or anything I should look for? Mine is cracked too

I just got a replacement one from oreillys since a friend works there & gave me a discount. I am thinking about getting a mishimoto one for when I do my 6G75 swap, yea I know I don't really need it but I just want some bling under my hood lol!