Post What You Did To Your Car or Bought Today!

**csjoh** · 01-13-2015, 08:10 AM

I hacked together a harness for a friend when doing a Mini D2S 3.0 retrofit on his Honda Element and had so many issues with the stock wiring. I even fried an eBay harness on the first lights-on test, so I just got a MotoControl from TRS and all was good. You could probably return your single beam harness and exchange it for the MotoControl, just ask TRS to do the return for you - they're awesome like that.

**coconut** · 01-13-2015, 09:14 AM

CSJOH, I talked to one of the guys at TRS and they worked with me. Was able to return the incorrect harness and ordered the correct one. Agree they are aesome.

**Kros702** · 01-13-2015, 09:18 AM

Originally Posted by Thatfresh_kid

[IMG]

[/IMG] Finally got my Jdm tail lights <3

Niccee!! I need to get myself a pair lol

**XsinshineX** · 01-13-2015, 09:20 AM

So in my quest for manual I ordered this one

and I received this one

I also thought they were going to send the starter plate but didn't. The one I got is missing a few things and not to spiffy about trans could someone tell me what missing pieces I need to get. Appreciate the help.

**demond0d5** · 01-13-2015, 11:07 AM

Starter plate

Shifter tower with knob

Shifter cables and hardware

Pedals

Clutch master (I would get new master/slave)

Clutch fluid reservoir

Clutch line (iirc can use a 2g braded ss line)

Mounts (you have have the manual one on trans already)

MANUAL intermediate shaft (I had to buy new from stealership; $150)

This should be down by the throwout bearing, it is mandatory and idk where the hell to get it if your trans ain't got it

Clutch flywheel pressure plate etc

Hard to tell which pictures I uploaded where so if I did It wrong I will find the right one in a sec

Sent from my iPhone using Tapatalk

**demond0d5** · 01-13-2015, 11:10 AM

I meant to say you MAY* have the mounts on the trans already...if so you saved yourself a few bucks and an hours worth of swapping them over

This is all for the f5m51 V6 trans btw...same stuff I believe for the 2.4, just a different gearbox (I got my shit off a 2.4)
EXCEPT the 2.4 doesn't have intermediate shaft pictured...they are non-equal length cv

Sent from my iPhone using Tapatalk

**XsinshineX** · 01-13-2015, 11:13 AM

I've got a few of that stuff so far it just looked like in the trans some stuff was taken off. There's a hole where a bolt or something might go that you can see through. You can see it real good in the bottom middle picture.

**demond0d5** · 01-13-2015, 11:23 AM

Ran out to mine real quick and looked, it looks like it's just a cap to plug the hole (maybe for te bolt you have to remove to get out the throughout bearing idk) but I'm sure there are a few guys on here that know exactly what it is, just give it a few.

Sent from my iPhone using Tapatalk

**coconut** · 01-13-2015, 11:31 AM

Originally Posted by Kros702

Niccee!! I need to get myself a pair lol

Trying to get him to trade with me but he wont go for it. Sad part is I bought these for him. SMDH

**Galantman03** · 01-13-2015, 12:44 PM

The cap is to remove the fork pivot pin. Pop the cap off, unbolt the pin, and then it slides out through the cap hole

Sent from my DROID RAZR using Tapatalk

**demond0d5** · 01-13-2015, 12:45 PM

Yeah that's what I was thinking of ^

Just got the wrong part name XD

Sent from my iPhone using Tapatalk

**XsinshineX** · 01-14-2015, 08:30 AM

i contacted the seller yesterday and got a reply saying he was going to send the starter plate and the mounts im missing. it looks like there are a couple mounts for the shifter cables on the trans that are missing on the one i got. just a few more things and i'll be ready to get swapped over.