beam514's 99 Galant: 3.5L Swap

I'm a little scared to cut the bumper. If I just widen the holes, they will have a similar width to the old-style VR-4 bumper, which isn't bad. I'll decide when I mock it up again today

Quote:

---

Originally Posted by beam514

I'm a little scared to cut the bumper. If I just widen the holes, they will have a similar width to the old-style VR-4 bumper, which isn't bad. I'll decide when I mock it up again today

---

Cut the bumper be a man!

don't be an embarrassment to this hair:

http://sphotos.ak.fbcdn.net/hphotos-..._7396775_n.jpg

Quote:

---

Originally Posted by beam514

I'm a little scared to cut the bumper. If I just widen the holes, they will have a similar width to the old-style VR-4 bumper, which isn't bad. I'll decide when I mock it up again today

---

Dont be a wussy! Measure, measure again then Cut the bumper, Jimney Christmas!

haha you guys are ridiculous
yeah I might end up cutting the bumper. Maybe some day I'll just mold this lip to the bumper, so it won't matter anyway lol

I cut my bumper for the lip and it worked great. Sat nice and flush until half of the lip went missing.

ah I forgot about that! did you get a new bumper? I'm talking cutting BIG holes for the air ducts lol

decided to cut the lip
Now I just need to heat the lip to mold it to the shape of the bumper. This might even take some screws underneath near the fog lights to help keep it's shape

Quote:

---

Originally Posted by beam514

I picked it up locally from a guy on Craigslist. I have a feeling he has a few of them

http://i215.photobucket.com/albums/c...s/IMG_7010.jpg
http://i215.photobucket.com/albums/c...s/IMG_7012.jpg
http://i215.photobucket.com/albums/c...s/IMG_7013.jpg

I'm currently in the process of installing it. I'm trying to maintain the "teeth" in the lower grill of the bumper, so I'm cutting notches in the lip to make it fit.

found this on ebay:
http://cgi.ebay.com/ebaymotors/SPOON...Q5fAccessories

$73 shipped, not bad, considering I had to drive out of my way a little bit to meet up with the guy
Also, like I said previously, this lip is polyurethane, NOT ABS like a lot of the mugen lip. That makes this lip a lot more flexible and easier to work with. I'm feeling pretty confident with making it flush with the bumper.

---

Isn't that the Mugen lip?

thats the spoon lip for an intergra

Whats the difference between spoon mugen n type R?

Quote:

---

Originally Posted by Corey2kG

Whats the difference between spoon mugen n type R?

---

Hondatech, noob!

JK! haha! :)

Quote:

---

Originally Posted by polishmafia

Hondatech, noob!

JK! haha! :)

---

nah you guys'd get hated on on a honda site for the replica lips

and iirc the real mugen/spoon lips don't look like that...or aren't even made for usdm front bumpers

I just checked ebay n saw the difference that hondatech website was useless.

All right, the lip is pretty much the shape of the bumper now, I just need to cut off the ends, bend them in, then screw it on. I've been tired all day though so I'm going to call it quits for the night I think

Pictures!

ask and you shall receive

http://i215.photobucket.com/albums/c...s/IMG_7025.jpg
cutting the air duct on the lip to fit under the bumper

http://i215.photobucket.com/albums/c...s/IMG_7027.jpg
what it looked like before final cuts and sanding

http://i215.photobucket.com/albums/c...h_IMG_7028.jpg
http://i215.photobucket.com/albums/c...h_IMG_7030.jpg
test fit

http://i215.photobucket.com/albums/c...s/IMG_7031.jpg
here you can see how close it is to the bumper

http://i215.photobucket.com/albums/c...s/IMG_7032.jpg
this is the original shape of the lip. It's pretty far off from the true shape of the bumper

http://i215.photobucket.com/albums/c...s/IMG_7033.jpg
after one round of heating and shaping

http://i215.photobucket.com/albums/c...s/IMG_7036.jpg
http://i215.photobucket.com/albums/c...s/IMG_7038.jpg
http://i215.photobucket.com/albums/c...s/IMG_7039.jpg
This is after pretty much finishing the driver's side

http://i215.photobucket.com/albums/c...s/IMG_7043.jpg
passenger side with a little more work to do

http://i215.photobucket.com/albums/c...s/IMG_7044.jpg
http://i215.photobucket.com/albums/c...s/IMG_7045.jpg
concrete blocks are your friends

http://i215.photobucket.com/albums/c...s/IMG_7046.jpg
The passenger side almost done. I did a little more heating and now it pretty much sits flush.

and of course, my weapon of choice:
http://i215.photobucket.com/albums/c...s/IMG_7037.jpg

Wow that came out pretty good alot cleaner then my little brothers mugen lip came out(Carlos 99galantES) lol. flows nicely. Great work. Now for the end result.

great job on the lip now for the final stage

http://i215.photobucket.com/albums/c...s/IMG_7047.jpg
http://i215.photobucket.com/albums/c...s/IMG_7048.jpg
http://i215.photobucket.com/albums/c...s/IMG_7050.jpg
http://i215.photobucket.com/albums/c...s/IMG_7052.jpg
http://i215.photobucket.com/albums/c...s/IMG_7054.jpg
http://i215.photobucket.com/albums/c...s/IMG_7057.jpg
almost looks like stock height! haha jk. The lip is held on with double sided tape on the sides of the bumper and in the lower grill in this pic. The double sided tape helped the lip keep its shape when I was folding the ends in. You can see that the fitment is pristine. With patience, you can pretty much mold this thing to exactly the shape of the bumper.

http://i215.photobucket.com/albums/c...s/IMG_7058.jpg
This is one location where I screwed in the lip to make sure it's secure

http://i215.photobucket.com/albums/c...s/IMG_7061.jpg
edges folded in and screwed in

http://i215.photobucket.com/albums/c...s/IMG_7062.jpg
final fitment picture. awesome.

http://i215.photobucket.com/albums/c...s/IMG_7065.jpg
http://i215.photobucket.com/albums/c...s/IMG_7068.jpg
http://i215.photobucket.com/albums/c...s/IMG_7070.jpg
http://i215.photobucket.com/albums/c...s/IMG_7071.jpg

all done! I'm thinking about doing black sideskirts to match the front lip :)

looks perfect, i should pick up one myself