Galantman03's 8G Build

[Galantman03]

^ thanks man. Weird question. Does anybody know if the evo 8 power steering pump bracket bolts to our pump?

[Galantman03]

Bam!



No other update really.... Except the head i sent in was not safe for the build that im doing so... Eff

[Galantman03]

Ok, need some help here. Decided to clean the hood and grill and noticed that the grills Finish is fubard. When i inspected it upon receiving it, it looked great. Now, it has been stored in the closet for 7 months, and now the finish is cloudy in a lot of places, so what are my options?

[spdracr]

Was it cleared before?? From what I learned if its not cleared then the resin gets yellow or cloudy so sand it and clear it. I'm sure someone else could correct or confirm my info.

[Galantman03]

No it wasn't cleared before, is the cloudiness on the surface or in the resin?

[dronesurfboards]

its in the resin, just wet sand it and clear coat it and it should look brand new.

[deeznutz]

Not good resin has a shelf life if it expired that's what happens. You can try sanding but you might have to take it down to the fiber itself.

[Galantman03]

Got the spacers.



Took the entire knock sensor wire out of the loom. And cut me some pig tails lol
Hey what is the easiest way to tell a i4 iac from a v6 iac. The evo and the galant have the same iac, part numbers match, but idk which one i have lol

[spdracr]

Got the spacers.

Spacers for what??

[Galantman03]

To have the brembos clear the spokes

[spdracr]

Is the splines of the axle long enough to fit through that opening and clear with the axle nut??

[Galantman03]

The spacer doesn't space that part out. The ring you see is the hubcentric ring for the spacer

[spdracr]

Gotcha.

[Galantman03]

[wetamup2k3g]

Dope!! This is looking nicer by the post!

[2002BlackDragon]

Seriously, that is freaking awesome! I might just steal that idea for when I do the Rage build. Hope you don't mine. Lol

[deeznutz]

[QUOTE=Galantman03;756411]



Your rotors look Cryo treated. Are they?

[Galantman03]

Dope!! This is looking nicer by the post!

Thank you thank you... Keep an eye out.... Its coming

Seriously, that is freaking awesome! I might just steal that idea for when I do the Rage build. Hope you don't mine. Lol

Nope dont mind, but be prepared for head aches sifting through all the mill spec info out there, and the price. If you need help just ask man

Your rotors look Cryo treated. Are they?

I dont think so, I know they are wrapped in a corrosion resistant coating.

[underated]

the tips are different on the iac's

[deeznutz]

Ok that's why the look darkened...